Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$24.00
US$24.00
US$30.00
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
US$20.00
US$20.00
US$25.00
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$22.00
US$22.00
US$27.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$31.25
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
Ordina

Ordina per:

  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
  • Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...
    US$24.00
    US$24.00
    US$30.00
  • Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...
    US$20.00
    US$20.00
    US$25.00
  • Roland CAD/CAM Carbide Tools Flat-End for Milling Zirconia, PMMA, PEEK, etc.

    Roland CAD/CAM Carbide Tools Flat-End for Milling Zirconia, PMMA, PEEK, etc.

    Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6(Flat-End) 10 50...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$20.00
    US$20.00
    US$25.00
  • Wieland Zenotec Select Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Wieland Zenotec Select Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0 19 40 3...
    US$20.00
    US$20.00
    US$31.25
  • VHF CAD/CAM Tools 35mm Length with Diamond Coat Special for Milling Zirconia Disc

    VHF CAD/CAM Tools 35mm Length with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. Diamond coat is special for milling zirconia disc with good performance to mill about 500units crowns. The tools can't be used for K4 due to the...
    US$28.00
    US$28.00
    US$40.00
  • Wieland Select Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Wieland Select Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 40 3 0.7 7...
    US$20.00
    US$20.00
    US$25.00
  • ZirkonZahn 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    ZirkonZahn 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5 with 3mm Shank. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 6 57 3 1.0 12 57 3 2.0...
    US$28.00
    US$28.00
    US$40.00
  • ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 4 57 3 1.5 16 57 3 Have Questions? Contact Us
    US$20.00
    US$20.00
    US$25.00
  • ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 57 3 1.0 12 57 3 2.0 18...
    US$20.00
    US$20.00
    US$27.50
  • Yenadent CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Yenadent CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Yenadent CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 12 41 4 1.0 6 41 4 2.0 18 41 4 Have Questions?Contact Us
    US$20.00
    US$20.00
    US$31.25
  • Yenadent CAD/CAM Milling Bur 46mm Length with DLC Coat for Zirconia Block

    Yenadent CAD/CAM Milling Bur 46mm Length with DLC Coat for Zirconia Block

    Feature 100% compatible with the Yenadent CAD/CAM system. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 46 4 1.0 16 46 4 2.0 16 46 4 Have Questions? Contact Us
    US$18.00
    US$18.00
    US$22.50
  • Wieland MINI Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Wieland MINI Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Feature 100% compatible with the Wieland Zenotec MINI CAD/CAM system. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 35 3 0.7 7...
    US$20.00
    US$20.00
    US$25.00
  • Sirona MCX5 Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Sirona MCX5 Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Feature 100% compatible with the Sirona MCX5 CAD/CAM system. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18 43...
    US$20.00
    US$20.00
    US$25.00
  • DEPRAG CADCAM Tools 6mm Shank with AlTiN Coat for Milling Titanium, CoCr

    DEPRAG CADCAM Tools 6mm Shank with AlTiN Coat for Milling Titanium, CoCr

    Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 3.0-Roto 12.5 50 6 2.0-Roto 12.5 50 6 1.5-Roto 8 50 6...
    US$25.00
    US$25.00
    US$31.25
  • Imes-Icore 3mm Shank Tools Single Flute T11, T12 for Milling PMMA, PEEK, Wax

    Imes-Icore 3mm Shank Tools Single Flute T11, T12 for Milling PMMA, PEEK, Wax

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, 450i, COREITEC one, etc with 3mm shank. The single blade tools can be used for milling PMMA, PEEK, wax discs with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0(Single Blade) 14 48...
    US$20.00
    US$20.00
    US$25.00
  • ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.

    ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14 47 4...
    Da US$16.00
    Da US$16.00
    US$20.00
  • Dental Four DF400/DF600 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    Dental Four DF400/DF600 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 50 6 2.5 20...
    US$25.00
    US$25.00
    US$31.25
  • Aidite AMW-400 Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics

    Aidite AMW-400 Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 50 6 1.0 8 50 6 2.5...
    US$25.00
    US$25.00
    US$31.25
  • Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia

    Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia

    Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...
    US$24.00
    US$24.00
    US$30.00