-
YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite
Feature 100% compatible with the YUCERA YRC-6X CAD/CAM system with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 10 50 4 2.5 16...- US$20.00
- US$20.00
- Prezzo unitario
- per
-
Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block
Feature 100% compatible with the Dentium Rainbow-mill CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 43 3 1.0 16 50 3 2.0 16 50 3...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc
Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools with AlTiN coat is special to mill metal disc like titanium, Cobalt Chrome,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 3.0 15...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque
Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
- A1O
- A2O
- A3O
- A3.5O
-
Wieland Zenotec Select Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0 19 40 3...- US$20.00
- US$20.00
- US$31.25
- Prezzo unitario
- per
-
ZirkonZahn 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5 with 3mm Shank. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 6 57 3 1.0 12 57 3 2.0...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 4 57 3 1.5 16 57 3 Have Questions? Contact Us- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 57 3 1.0 12 57 3 2.0 18...- US$20.00
- US$20.00
- US$27.50
- Prezzo unitario
- per
-
Sirona MCX5 Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Sirona MCX5 CAD/CAM system. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18 43...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.
Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are one flute design special for milling PMMA, Wax, PEEK. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14...- Da US$16.00
- Da US$16.00
- US$20.00
- Prezzo unitario
- per
-
Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...- US$20.00
- US$20.00
- US$30.00
- Prezzo unitario
- per
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5159, RDP5154, RDP5152, RDP5156
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Prezzo unitario
- per
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5979A, RDP5974A, RDP5977A, RDP5977B
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$10.00
- US$10.00
- US$12.50
- Prezzo unitario
- per
-
4106201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$10.00
- US$10.00
- US$10.00
- Prezzo unitario
- per
-
5006257HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$10.00
- US$10.00
- US$10.00
- Prezzo unitario
- per
-
5005239HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$10.00
- US$10.00
- US$10.00
- Prezzo unitario
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
- Scegliendo una selezione si ottiene un aggiornamento completo della pagina.