Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$24.00
US$24.00
US$30.00
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
US$20.00
US$20.00
US$25.00
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$22.00
US$22.00
US$27.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$31.25
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
Ordina

Ordina per:

  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
  • 1042272HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    1042272HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For coarse abrasion on chrome - cobalt alloys, precious metall alloys, chrome - nickel alloys, model cast alloys, acrylics. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance....
    US$7.50
    US$7.50
    US$10.00
  • 1034239HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    1034239HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For coarse abrasion on chrome - cobalt alloys, precious metall alloys, chrome - nickel alloys, model cast alloys, acrylics. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance....
    US$7.50
    US$7.50
    US$10.00
  • Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

    Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

    Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
    US$18.00
    US$18.00
    US$22.50
  • PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc

    PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc

    Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Carbide single flute is a design special for plastic materials to lower the cutting resistant and smoother surface finishing. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 50 3 1.0 16...
    US$18.00
    US$18.00
    US$22.50
  • Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Feature 100% compatible with the Yenadent CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr Disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 45 4 1.5 10 45 4 2.0 12 45 4 3.0 15 45 4 Have Questions? Contact...
    US$25.00
    US$25.00
    US$31.25
  • DEPRAG CADCAM Tools with Diamond Coat Special for Milling Zirconia

    DEPRAG CADCAM Tools with Diamond Coat Special for Milling Zirconia

    Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 6 50 4 0.6 15...
    US$24.00
    US$24.00
    US$30.00
  • ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR

    ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are designed with bullnose header types. Size Details H(mm) L1(mm) L(mm) D(mm) D1.5R0.1 5 50 6 D1.5R0.2 14 50 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$27.50
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1139, RDP1134

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1139, RDP1134

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$12.00
    US$12.00
    US$15.00
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5059, RDP5054, RDP5052, RDP5056, RDP5057A

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5059, RDP5054, RDP5052, RDP5056, RDP5057A

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$7.00
    US$7.00
    US$8.75
  • Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5549, ZDG5109, ZDG5209, ZDG5509

    Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5549, ZDG5109, ZDG5209, ZDG5509

    Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...
    US$5.00
    US$5.00
    US$6.25
  • Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1109, ZDG1009, ZDG1059

    Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1109, ZDG1009, ZDG1059

    Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...
    US$9.00
    US$9.00
    US$11.25
  • 5009272HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    5009272HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$7.50
    US$7.50
    US$10.00
  • 7020277HP-Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    7020277HP-Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Standard-For all dental materials, the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces rework. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • 7003001HP- Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    7003001HP- Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Standard-For all dental materials, the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces rework. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • 6005292HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    6005292HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Super Fine-Smooth cutting pattern on all alloys and composites,reduces rework - especially suitable on prosthetic appliances for papilla shaping. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR

    ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 14 50 6 2.0 18 55 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$27.50
  • Imes-Icore 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Imes-Icore 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.5 16 48 3 Have Questions? Contact Us
    US$20.00
    US$20.00
    US$25.00
  • Flat-end Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Flat-end Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Feature 100% compatible with the Yenadent CAD/CAM system 5X-200. The tools are special for milling metal materials like titanium, CoCr Disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.4 10 37 4 1.8 10 37 4 Have Questions? Contact Us
    US$25.00
    US$25.00
    US$31.25
  • 2501141HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2501141HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...
    US$7.50
    US$7.50
    US$10.00
  • 2405199HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2405199HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00