-
ZirkonZahn 6mm Shank Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1 with 6mm Shank. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. 0.6 A, 1.5A are special for milling zirconia implant...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Fresa Arum CAD/CAM con gambo da 6mm per disilicato di litio, vetroceramica
Caratteristica Compatibile al 100% con il sistema CAD/CAM di ARUM come 5X-200, 5X-450, 5X-500, ecc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6...- US$25.00
- US$25.00
- US$37.50
- Prezzo unitario
- per
-
ZirkonZahn M1 CAD/CAM Tools for Milling Titanium, CoCr with Ball-end and Flat-end
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1 with 6mm Shank. The tools are special for milling metal materials like titanium, CoCr Disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5R 6 50 6 1R 10 50 6 2R 12 50 6 3R...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Roland Wet 4W/42W CAD/CAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Roland Wet CAD/CAM system like 4W, 42W with 3mm Shank Diameter The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 9 40 3 1.0 6...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Dental Four DF400/DF600 6mm Shank Tools Special for Milling Titanium, Cocr
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling metal materials like titanium, CoCr disc. Have Questions? Contact Us- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
PrograMill PM7 CAD/CAM Milling Burs Special for PMMA, PEEK, Wax
Feature 100% compatible with the PrograMill PM7 CAD/CAM. The tools are special for milling plastic materials like PMMA, PEEK, Wax. H(mm) L1(mm) L(mm) D(mm) 0.5 8 49 6 1.0 10 52 6 f1.5 15 49 6 2.5 25 59 6 5.0 35 59 6...- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
-
Arum CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr
Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 10 50 6 1.5 10 50 6 2.0...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
ARUM/Versamill 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the ARUM CADCAM systems like 5X-200, 5X-450, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 14 55 6 1.0 16 55 6 1.5...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
PrograMill PM7 CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the PrograMill PM7 CAD/CAM. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 16 45 6 1.0 8 50 6 2.0 18 50 6 3.0 20...- US$25.00
- US$25.00
- US$37.50
- Prezzo unitario
- per
-
PrograMill PM7 Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with PrograMill PM7 CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 52 6 1.0 14 53 6 2.5 20 53 6 Have Questions? Contact...- US$30.00
- US$30.00
- US$43.75
- Prezzo unitario
- per
-
PrograMill PM7 CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr
Feature 100% compatible with the PrograMill PM7 CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 40 6 1.0 8 45 6 1.5 12 45 6 2.0 12 45 6 3.0...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
ZirkonZahn M1 CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the ZirkonZahn M1 CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.25 8.6 50 6 2.5 16 50 6 Have...- US$25.00
- US$25.00
- US$37.50
- Prezzo unitario
- per
-
VHF 5axis Carbide Single Flute Tools for Milling PMMA, PEEK
Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 40 3 2.0...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
ARUM CAD/CAM 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 53 6 2.0...- US$30.00
- US$30.00
- US$43.75
- Prezzo unitario
- per
-
ZirkonZahn M1 Milling Burs 6mm Shank Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 20 50 6 2.0 17...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
VHF CAD/CAM Milling Bur 35mm Length with DLC Coat for Zirconia Block
Feature 100% compatible with VHF CAD/CAM system like K4, N4 with 35mm total length. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 35 3 0.6 7 35 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Roland DWX-42W Milling Bur Special for Machining Titanium Disc
Feature 100% compatible with Roland DWX-42W CAD/CAM. The tools are special for milling dental titanium disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 5 34 3 2.0 8 34 3 3.0 10 34 3 Have Questions? Contact Us- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Fresa Arum CAD/CAM con gambo da 4mm per disilicato di litio, vetroceramica
Caratteristica Compatibile al 100% con il sistema CAD/CAM di ARUM come 5X-400, 5X-300, ecc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.6 8 41 4 1.0...- US$20.00
- US$20.00
- US$31.25
- Prezzo unitario
- per
-
Roland CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 1.0...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$31.25
- Prezzo unitario
- per
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
- Scegliendo una selezione si ottiene un aggiornamento completo della pagina.