-
Imes-Icore CAD/CAM 6mm Shank Tools Shaft Flat-end for Titanium,COCR
Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. with 6mm shank diameter. The tools are special for milling metal like titanium, Co-Cr, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 2.0(T67) 7 50 6 1.5(T68) 15 50 6 1.5(T69) 7 50...- US$22.00
- US$22.00
- US$31.25
- Prezzo unitario
- per
-
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
PrograMill PM3/5 Carbide Tools for Milling Zirconia, Wax, PMMA, PEEK, Soft Metal
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 50...- US$18.00
- US$18.00
- US$24.00
- Prezzo unitario
- per
-
Sirona MCX5 CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Sirona MCX5 CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18 43 3 2.5 25 43 3 Have...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
DOF CRAFT 5X CAD/CAM Tools Special for Milling Metal like Titanium, CoCr, etc.
Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 40 4 2.0 12 40 4 Have Questions? Contact Us- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
ARUM CAD/CAM Tools 4mm Shank with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the ARUM CAD/CAM system like 5X-400. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 16 50 4 2.0 18 50 4...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...- US$18.00
- US$18.00
- US$31.25
- Prezzo unitario
- per
-
Imes-Icore Milling Burs 3mm Shank Special for PMMA, PEEK to Avoid Sticking
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48...- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
-
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
-
DOF Craft CAD/CAM Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16 40 4 2.0 16 40...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Carbide single flute is a design special for plastic materials to lower the cutting resistant and smoother surface finishing. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 50 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
ZirkonZahn 3mm Shank Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5 with 3mm Shank. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, Soft Metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 6 57...- US$18.00
- US$18.00
- US$25.00
- Prezzo unitario
- per
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5154, ZDG5054
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$6.00
- US$6.00
- US$7.50
- Prezzo unitario
- per
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5954, ZDG5904
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$8.00
- US$8.00
- US$10.00
- Prezzo unitario
- per
-
Cerec3/InLab Compact Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Sirona Cerec3 Compact and InLab Compact. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Have Questions? Contact Us- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM 6mm Shank Tools Torus for Titanium,COCR T61/T62/T63/T64
Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. with 6mm shank diameter. The tools are special for milling metal like titanium, Co-Cr, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 3.0(T61) 15 50 6 2.0(T62) 16 50 6 1.5(T63) 7 50...- US$22.00
- US$22.00
- US$31.25
- Prezzo unitario
- per
-
Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin
Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...- US$48.00
- US$48.00
- US$60.00
- Prezzo unitario
- per
- OD-A1
- OD-A2
- OD-A3
- OD-A3.5
-
Shofu Vintage Halo Porcelain for Metal 50g-Body
Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...- US$28.00
- US$28.00
- US$35.00
- Prezzo unitario
- per
- A1B
- A2B
- A3B
- A3.5B
-
PrograMill PM3/5 Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 45 3 1.0 11 50 3 2.0...- US$20.00
- US$20.00
- US$31.25
- Prezzo unitario
- per
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5169, RDP5164, RDP5162, RDP5166
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Prezzo unitario
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$31.25
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
- Scegliendo una selezione si ottiene un aggiornamento completo della pagina.