-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1050, RDP1059, RDP1054, RDP1052, RDP1056
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$12.00
- US$12.00
- US$15.00
- Prezzo unitario
- per
-
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
DEPRAG 6mm Shank CADCAM Tools Special for PMMA, PEEK, Wax
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are special for milling PMMA, PEEK, Wax. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 16 50 6 2.0 20 50 6 1.5(Flat) 18 50...- US$20.00
- US$20.00
- US$30.00
- Prezzo unitario
- per
-
DEPRAG CADCAM Tools 6mm Shank with AlTiN Coat for Milling Titanium, CoCr
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) T1-3.0-Roto 12.5 50 6 T2-2.0-Roto 12.5 50 6 T3-1.5-Roto 8 50 6...- US$22.00
- US$22.00
- US$31.25
- Prezzo unitario
- per
-
Dental Four DF400/DF600 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 16 50 6 2.5...- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
-
Imes-Icore 6mm Shank Carbide Tools for Milling Zirconia, Wax, PMMA, Soft Metal T33, T15, T32, T12/T14, T11/T13, T17, etc.
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3(Conical) 20 50 6 0.6(Conical)...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal
Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm)...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Imes-Icore 3mm Shank Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Imes-Icore CAD/CAM system like 250i, etc with 3mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 40 3 1.0 13 40 3...- US$20.00
- US$20.00
- US$31.25
- Prezzo unitario
- per
-
DOF CRAFT 5X CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the DOF CRAFT 5X CADCAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16 40 4 2.0 16 40 4...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 53 6 1.0 14 53 6 2.5 20 53...- US$26.00
- US$26.00
- US$32.50
- Prezzo unitario
- per
-
ARUM CAD/CAM 6mm Shank Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 53 6 2.0 20 55...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal
Feature 100% compatible with the VHF 4axis CAD/CAM system like K4, N4, etc with 35mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5159, ZDG5059, ZDG5529, ZDG5149
Feature For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$6.00
- US$6.00
- US$7.50
- Prezzo unitario
- per
-
VHF 4-axis CADCAM Carbide Single-Flute/Double-Flute Milling Tools for PMMA, PEEK
Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 35 3 2.0 16...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Wieland Select CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.7 7 40 3 1.0 16 40 3 2.5 20 40 3...- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
-
VHF CAD/CAM Milling Bur 40mm Length with DLC Coat for Zirconia Block
Feature 100% compatible with VHF CAD/CAM system like R5, K5, S1, S2, S5, etc with 40mm total length. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 40 3 0.6 7...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
VHF 4axis CAD/CAM Tools 32mm Length for Milling Titanium, CoCr
Feature 100% compatible with the VHF 4axis CAD/CAM system like Z4, N4, etc. The tools are special for milling metal materials like titanium, CoCr Disc. 0.6mm, 1.0mm, 2.0mm is ball nose milling bur. 1.2F is flat-end for milling implant abutment. Size Details H(mm) L1(mm)...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Roland CAD/CAM Milling Bur with DLC Coat for Zirconia Block
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 17 50 4 0.6 8 50 4 0.8 10 50...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1169, ZDG1179, ZDG1189
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$9.00
- US$9.00
- US$11.25
- Prezzo unitario
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$24.00
- US$24.00
- US$30.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$31.25
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
- Scegliendo una selezione si ottiene un aggiornamento completo della pagina.