Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$24.00
US$24.00
US$30.00
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
US$20.00
US$20.00
US$25.00
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$22.00
US$22.00
US$27.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$31.25
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
Ordina

Ordina per:

  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
  • ARUM CAD/CAM 6mm Shank Tools with DLC Coat for Machining Zirconia Disc

    ARUM CAD/CAM 6mm Shank Tools with DLC Coat for Machining Zirconia Disc

    Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 53 6 2.0 20 55...
    US$18.00
    US$18.00
    US$22.50
  • Imes-Icore 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Imes-Icore 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.5 16 48 3 Have Questions? Contact Us
    US$20.00
    US$20.00
    US$25.00
  • ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 4 57 3 1.5 16 57 3 Have Questions? Contact Us
    US$20.00
    US$20.00
    US$25.00
  • Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
    US$24.00
    US$24.00
    US$30.00
  • Sirona MCX5 CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Sirona MCX5 CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the Sirona MCX5 CAD/CAM system. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticking. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3 2.5 16 47 3...
    US$22.00
    US$22.00
    US$27.50
  • Sirona MCX5 CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Sirona MCX5 CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Sirona MCX5 CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18 43 3 2.5 25 43 3 Have...
    US$28.00
    US$28.00
    US$52.50
  • Roland CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Roland CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 1.0...
    US$24.00
    US$24.00
    US$30.00
  • ZirkonZahn M1 Milling Burs 6mm Shank Special for PMMA, PEEK, to Avoid Sticking

    ZirkonZahn M1 Milling Burs 6mm Shank Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 20 50 6 2.0 17...
    US$25.00
    US$25.00
    US$31.25
  • ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 57 3 1.0 12 57 3 2.0 18...
    US$20.00
    US$20.00
    US$27.50
  • Roland CAD/CAM Milling Burs Special for PMMA, PEEK to Avoid Sticking

    Roland CAD/CAM Milling Burs Special for PMMA, PEEK to Avoid Sticking

    Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 6 50 4 1.0 16 50 4...
    US$22.00
    US$22.00
    US$27.50
  • Imes-Icore Milling Burs 3mm Shank Special for PMMA, PEEK to Avoid Sticking

    Imes-Icore Milling Burs 3mm Shank Special for PMMA, PEEK to Avoid Sticking

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48...
    US$22.00
    US$22.00
    US$27.50
  • Imes-Icore Milling Burs 6mm Shank Special for PMMA, PEEK to Avoid Sticking

    Imes-Icore Milling Burs 6mm Shank Special for PMMA, PEEK to Avoid Sticking

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 53 6 1.0 14 53 6 2.5...
    US$25.00
    US$25.00
    US$31.25
  • Imes-Icore 3mm Shank Carbide Tools for Milling Zirconia, Wax, PMMA, Soft Metal T33, T15, T32, T12/T14, T11/T13

    Imes-Icore 3mm Shank Carbide Tools for Milling Zirconia, Wax, PMMA, Soft Metal T33, T15, T32, T12/T14, T11/T13

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...
    US$18.00
    US$18.00
    US$22.50
  • Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
    US$22.00
    US$22.00
    US$27.50
  • Flat-end Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Flat-end Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Feature 100% compatible with the Yenadent CAD/CAM system 5X-200. The tools are special for milling metal materials like titanium, CoCr Disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.4 10 37 4 1.8 10 37 4 Have Questions? Contact Us
    US$25.00
    US$25.00
    US$31.25
  • Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Yenadent CAD/CAM Tools for Milling Titanium, CoCr

    Feature 100% compatible with the Yenadent CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr Disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 45 4 1.5 10 45 4 2.0 12 45 4 3.0 15 45 4 Have Questions? Contact...
    US$25.00
    US$25.00
    US$31.25
  • Yenadent CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Yenadent CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Yenadent CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 12 41 4 1.0 6 41 4 2.0 18 41 4 Have Questions?Contact Us
    US$20.00
    US$20.00
    US$31.25
  • VHF 5axis CAD/CAM Metal Tools 35mm Length for Milling Titanium, CoCr

    VHF 5axis CAD/CAM Metal Tools 35mm Length for Milling Titanium, CoCr

    Feature 100% compatible with the VHF CAD/CAM system like R5, S1, S2, S5. The tools are special for milling metal materials like titanium, CoCr Disc. 0.6mm, 1.0mm, 2.0mm is ball nose milling bur. 1.2F is flat-end for milling implant abutment. Size Details H(mm) L1(mm) L(mm)...
    US$20.00
    US$20.00
    US$25.00
  • VHF 4axis CAD/CAM Tools 32mm Length for Milling Titanium, CoCr

    VHF 4axis CAD/CAM Tools 32mm Length for Milling Titanium, CoCr

    Feature 100% compatible with the VHF 4axis CAD/CAM system like Z4, N4, etc. The tools are special for milling metal materials like titanium, CoCr Disc. 0.6mm, 1.0mm, 2.0mm is ball nose milling bur. 1.2F is flat-end for milling implant abutment. Size Details H(mm) L1(mm)...
    US$20.00
    US$20.00
    US$25.00
  • Imes-Icore CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    Imes-Icore CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 2.0 12 50 6 3.0 12 50...
    US$25.00
    US$25.00
    US$31.25