Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$24.00
US$24.00
US$30.00
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
US$20.00
US$20.00
US$25.00
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$22.00
US$22.00
US$27.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$31.25
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
Ordina

Ordina per:

  • In primo piano
  • Best seller
  • In ordine alfabetico, A-Z
  • In ordine alfabetico, Z-A
  • Prezzo crescente
  • Prezzo decrescente
  • Data, da meno a più recente
  • Data, da più a meno recente
  • UP3D CADCAM Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    UP3D CADCAM Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4...
    US$16.00
    US$16.00
    US$20.00
  • Imes-Icore 3mm Shank Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Imes-Icore 3mm Shank Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 250i, etc with 3mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 43 3 1.0 13 43 3...
    US$20.00
    US$20.00
    US$31.25
  • Imes-Icore CAD/CAM Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    Imes-Icore CAD/CAM Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 53 6 1.0 14 53 6 2.5 20 53...
    US$30.00
    US$30.00
    US$43.75
  • Roland DWX-42W Milling Bur Special for Machining Titanium Disc

    Roland DWX-42W Milling Bur Special for Machining Titanium Disc

    Feature 100% compatible with Roland DWX-42W CAD/CAM. The tools are special for milling dental titanium disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 5 34 3 2.0 8 34 3 3.0 10 34 3 Have Questions? Contact Us
    US$25.00
    US$25.00
    US$31.25
  • VHF CAD/CAM Tools 35mm Length with Diamond Coat Special for Milling Zirconia Disc

    VHF CAD/CAM Tools 35mm Length with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. Diamond coat is special for milling zirconia disc with good performance to mill about 500units crowns. The tools can't be used for K4 due to the...
    US$28.00
    US$28.00
    US$40.00
  • Wieland Select Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Wieland Select Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 40 3 0.7 7...
    US$20.00
    US$20.00
    US$25.00
  • Imes-Icore CAD/CAM Tools 3mm Shank with Diamond Coat Special for Milling Zirconia Disc

    Imes-Icore CAD/CAM Tools 3mm Shank with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48 3...
    US$24.00
    US$24.00
    US$30.00
  • Planmeca PlanMill 30S/40S Diamond Grinders for Milling Lithium Disilicate, Glass Ceramics

    Planmeca PlanMill 30S/40S Diamond Grinders for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Planmeca PlanMill 30S, 40S CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Have Questions? Contact Us
    Da US$25.00
    Da US$25.00
    US$40.00
  • Sirona MCX5 Milling Bur Special for Machining Titanium and COCR

    Sirona MCX5 Milling Bur Special for Machining Titanium and COCR

    Feature 100% compatible with the Sirona MCX5 CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 38 3 2.0 12 39 3 Have Questions? Contact Us
    US$25.00
    US$25.00
    US$31.25
  • ZirkonZahn 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    ZirkonZahn 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5 with 3mm Shank. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 6 57 3 1.0 12 57 3 2.0...
    US$28.00
    US$28.00
    US$40.00
  • Flat-End Imes-Icore CAD/CAM 6mm Shank Tools for Milling Titanium,COCR

    Flat-End Imes-Icore CAD/CAM 6mm Shank Tools for Milling Titanium,COCR

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 4 50 6 1.5 7 50 6 2.0 14 50 6 3.0 7...
    US$25.00
    US$25.00
    US$31.25
  • Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 18 50 6 2.5 22 50 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$31.25
  • Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

    Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica

    Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
    US$18.00
    US$18.00
    US$31.25
  • Roland Wet 4W/42W CAD/CAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramics

    Roland Wet 4W/42W CAD/CAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Roland Wet CAD/CAM system like 4W, 42W with 3mm Shank Diameter The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 9 40 3 1.0 6...
    US$25.00
    US$25.00
    US$31.25
  • VHF CAD/CAM Tools 40mm Length with Diamond Coat Special for Milling Zirconia Disc

    VHF CAD/CAM Tools 40mm Length with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with VHF CAD/CAM system like R5, K5, S1, S2, S5, etc. with 40mm total length. Diamond coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 7 40 3...
    US$28.00
    US$28.00
    US$40.00
  • VHF CAD/CAM Milling Bur 40mm Length with DLC Coat for Zirconia Block

    VHF CAD/CAM Milling Bur 40mm Length with DLC Coat for Zirconia Block

    Feature 100% compatible with VHF CAD/CAM system like R5, K5, S1, S2, S5, etc with 40mm total length. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 40 3 0.6 7...
    US$18.00
    US$18.00
    US$22.50
  • ARUM CAD/CAM 6mm Shank Tools Flat-End for Milling Titanium,COCR

    ARUM CAD/CAM 6mm Shank Tools Flat-End for Milling Titanium,COCR

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 8 50 6 2.0 18 55 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$27.50
  • ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR

    ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 14 50 6 2.0 18 55 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$27.50
  • ARUM CAD/CAM 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    ARUM CAD/CAM 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 53 6 2.0...
    US$26.00
    US$26.00
    US$32.50
  • Fresa Arum CAD/CAM con gambo da 6mm per disilicato di litio, vetroceramica

    Fresa Arum CAD/CAM con gambo da 6mm per disilicato di litio, vetroceramica

    Caratteristica Compatibile al 100% con il sistema CAD/CAM di ARUM come 5X-200, 5X-450, 5X-500, ecc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6...
    US$22.00
    US$22.00
    US$27.50