Feature 100% compatible with the DOF CRAFT 5X CAD/CAM system. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16...

Feature 100% compatible with the ARUM CADCAM systems like 5X-400, 5X-300, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 16 50 4 1.5...

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us

Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. Diamond coat is special for milling zirconia disc with good performance to mill about 500units crowns. The tools can't be used for K4 due to the...

Besonderheit100% kompatibel mit demSironaMCX5 CAD/CAM-System.Die Werkzeuge sind speziell zum Fräsen von Harzmaterialien wie PMMA, PEEK mit guter Leistung geeignet, um ein Anhaften zu vermeiden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns

Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...

Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 42 4 1.5 10 43 4 2.0 12 44 4...

Besonderheit 100% kompatibel mit dem Dentium CAD/CAM. Die Fräser werden mit Diamantkorn für die Bearbeitung von Glaskeramik, Lithiumdisilikat, Hybridkeramik etc. Größenangaben Hmm) L1 (mm) L(mm) D(mm) 0,6 6 50 6 1.0 10 50 6 2.0 12 50 6 Habe Fragen? Kontaktiere uns

Besonderheit100% kompatibel mitImes-IcoreCAD/CAM-System wie 250i mit 3mm SchaftDLC Coat kann etwa 150 Einheiten mahlen. (abhängig von der Härte des Zirkonoxidblocks).GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6104831.0144832.520483Habe Fragen?Kontaktiere uns

Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4 0.6 8 50 4 1.0...

Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...

Besonderheit100% kompatibel mit demZirkonZahnmanuelles CAD/CAM-System.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)1.054732.0164733.084733.016473Habe Fragen?Kontaktiere uns

Besonderheit100% kompatibel mit demWielandMINI CAD/CAM-System.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,3163530,773531.0163532.520353Habe Fragen?Kontaktiere uns

Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 50 6 2.5 20...

Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....

Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....

Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....

Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...

Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...

Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...