Besonderheit100% kompatibel mit demImes-IcoreCAD/CAM-System wie 140i, 250i, COREITEC one, etc. mit 3mm Schaft.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,3164830,6 (konisch)134830,6104831.0144832.520483Habe Fragen?Kontaktiere uns

Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. with 6mm shank diameter. The tools are special for milling metal like titanium, Co-Cr, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 3.0(T61) 15 50 6 2.0(T62) 16 50 6 1.5(T63) 7 50...

Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 50 3 1.0 16 50 3 2.5...

Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 16 50 6 2.5...

Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. Diamond Coat is special for milling zirconia disc with good performance Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 55 6 2.0 20 55 6 Have Questions? Contact Us

Feature High translucency up to 62%, matching the esthetics of natural teeth Thanks the simple and fast process, patients can experience a same day restoration without the need of a second appointment Have Questions? Contact Us

Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 53 6 1.0 14 53 6 2.5 20 53...

Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid composite, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 10 50 6...

Feature For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...

Feature 100% compatible with the DOF CRAFT 5X CADCAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16 40 4 2.0 16 40 4...

Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....

Besonderheit 100% kompatibel mit dem Amann Girrbach CAD/CAM wie Motion 2, Mikro ic, Matick, etc. Die Fräser werden mit Diamantkorn für die Bearbeitung von Glaskeramik, Lithiumdisilikat, Hybridkeramik etc. Größenangaben H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43 3 1.4 13.65 43...

Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 600, X-Mill 630, etc. with 6mm shank. The tools are special for milling metal like titanium, Co-Cr, etc. Size Details H(mm) Type L1(mm) L(mm) D(mm) T1-3.0 Ball 15 48 6 T2-2.0 Ball 12 48...

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...

Feature 100% compatible with the Sirona MCX5 CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 38 3 2.0 12 39 3 Have Questions? Contact Us

Besonderheit100% kompatibel mit demRolandCAD/CAM-Systeme wie DWX50, DWX51D, DWX52 usw.DLC Coat kann etwa 150 Einheiten mahlen. (abhängig von der Härte des Zirkonoxidblocks).GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,3175040,685040.8105041.0165041.0205042.0165042.025504Habe Fragen?Kontaktiere uns

Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...

Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. with 6mm shank diameter. The tools are special for milling metal like titanium, Co-Cr, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 2.0(T67) 7 50 6 1.5(T68) 15 50 6 1.5(T69) 7 50...

Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion 2, Mikro, etc.Diamond Coat ist speziell zum Fräsen von Zirkonoxidscheiben mit guter Leistung zum Fräsen von etwa 500 Einheiten Kronen geeignet.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns

Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion2, Mikro, etc.Die Werkzeuge sind speziell zum Fräsen von Harzmaterialien wie PMMA, PEEK mit guter Leistung, um ein Anhaften zu vermeiden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns