Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
US$20.00
US$20.00
US$25.00
Amann Girrbach CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 7 43 3 1.0 14...
US$18.00
US$18.00
US$22.50
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$24.00
US$24.00
US$30.00
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$22.00
US$22.00
US$27.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
    US$22.00
    US$22.00
    US$27.50
  • Imes-Icore CAD/CAM Milling Bur 3mm Shank with DLC Coat for Zirconia Block

    Imes-Icore CAD/CAM Milling Bur 3mm Shank with DLC Coat for Zirconia Block

    Feature 100% compatible with Imes-Icore CAD/CAM system like 250i with 3mm Shank DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48 3 2.5 20 48 3...
    US$18.00
    US$18.00
    US$22.50
  • Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5549, ZDG5109, ZDG5209, ZDG5509

    Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5549, ZDG5109, ZDG5209, ZDG5509

    Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...
    US$5.00
    US$5.00
    US$6.25
  • DOF Craft CAD/CAM Tools Special for PMMA, PEEK, to Avoid Sticking

    DOF Craft CAD/CAM Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16 40 4 2.0 16 40...
    US$18.00
    US$18.00
    US$22.50
  • ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR

    ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are designed with bullnose header types. Size Details H(mm) L1(mm) L(mm) D(mm) D1.5R0.1 5 50 6 D1.5R0.2 14 50 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$27.50
  • ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR

    ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 14 50 6 2.0 18 55 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$27.50
  • Imes-Icore 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Imes-Icore 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.5 16 48 3 Have Questions? Contact Us
    US$20.00
    US$20.00
    US$25.00
  • ZirkonZahn 3mm Shank Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    ZirkonZahn 3mm Shank Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5 with 3mm Shank. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, Soft Metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 6 57...
    US$18.00
    US$18.00
    US$25.00
  • Cerec3/InLab Compact Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Cerec3/InLab Compact Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Sirona Cerec3 Compact and InLab Compact. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Have Questions? Contact Us
    US$18.00
    US$18.00
    US$22.50
  • DEPRAG CADCAM Tools 6mm Shank with Diamond Coat for Milling Zirconia

    DEPRAG CADCAM Tools 6mm Shank with Diamond Coat for Milling Zirconia

    Feature 100% compatible with the DEPRAG CAD/CAM system like W5, W52, etc. with 6mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 6 0.6 8...
    US$24.00
    US$24.00
    US$30.00
  • ARUM/Versamill 4mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    ARUM/Versamill 4mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ARUM CADCAM systems like 5X-400, 5X-300, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 16 50 4 1.5...
    US$20.00
    US$20.00
    US$25.00
  • Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 18 50 6 2.5 22 50 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$31.25
  • Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1139

    Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1139

    Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...
    US$10.00
    US$10.00
    US$12.50
  • Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$48.00
    US$48.00
    US$60.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Body

    Shofu Vintage Halo Porcelain for Metal 50g-Body

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • PrograMill PM3/5 Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    PrograMill PM3/5 Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 45 3 1.0 11 50 3 2.0...
    US$20.00
    US$20.00
    US$31.25
  • XTCERA Xmill 600/630/650 Milling Tools for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    XTCERA Xmill 600/630/650 Milling Tools for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 600, X-Mill 630, etc. with 6mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 48 6 1.0...
    US$22.00
    US$22.00
    US$27.50
  • Aidite Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics

    Aidite Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Aidite AMW-400, AMW-400S, AMM580, AMM520 Pro, etc with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 50 6 1.0 10...
    US$25.00
    US$25.00
    US$31.25
  • ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 42 4 1.5 10 43 4 2.0 12 44 4...
    US$20.00
    US$20.00
    US$25.00
  • VHF CAD/CAM Tools 35mm Length with Diamond Coat Special for Milling Zirconia Disc

    VHF CAD/CAM Tools 35mm Length with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. Diamond coat is special for milling zirconia disc with good performance to mill about 500units crowns. The tools can't be used for K4 due to the...
    US$24.00
    US$24.00
    US$40.00