-
ARUM CAD/CAM 6mm Shank Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 53 6 2.0 20 55...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
XTCERA CADCAM Tools 6mm Shank Carbide for PMMA, PEEK, Wax, Soft Metal,etc.
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 600SE, X-Mill 600, etc. The carbide tools can be used for milling most dental materials like wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 48...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
DOF CRAFT 5X CAD/CAM Tools Special for Milling Metal like Titanium, CoCr, etc.
Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 32.5 4 1.5 10 32.5 4 2.0 12 32.5 4 Have Questions? Contact Us- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Imes-Icore Milling Burs 3mm Shank Special for PMMA, PEEK to Avoid Sticking
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48...- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
-
Flat-end Roland CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. DLC Coat with flat-end special for milling zirconia implant Size Details H(mm) L1(mm) L(mm) D(mm) 0.6F 10 50 4 1F 20 50 4 1.5F 20 50 4 2F 20 50 4 Have...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5169, RDP5164, RDP5162, RDP5166
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Unit price
- per
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5154, ZDG5054
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$6.00
- US$6.00
- US$7.50
- Unit price
- per
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5954, ZDG5904
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$8.00
- US$8.00
- US$10.00
- Unit price
- per
-
PrograMill PM3/5 Carbide Tools for Milling Zirconia, Wax, PMMA, PEEK, Soft Metal
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 50...- US$18.00
- US$18.00
- US$24.00
- Unit price
- per
-
PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Carbide single flute is a design special for plastic materials to lower the cutting resistant and smoother surface finishing. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 50 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal
Feature 100% compatible with the VHF 4axis CAD/CAM system like K4, N4, etc with 35mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR
Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are designed with bullnose header types. Size Details H(mm) L1(mm) L(mm) D(mm) D1.5R0.1 5 50 6 D1.5R0.2 14 50 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
-
VHF 4-axis CADCAM Carbide Single-Flute/Double-Flute Milling Tools for PMMA, PEEK
Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 35 3 2.0 16...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
DOF CRAFT 5X CAD/CAM Carbide Tools for Milling Zirconia, Wax, PMMA, PEEK, Soft Metal, etc.
Feature 100% compatible with the DOF CRAFT 5X CAD/CAM system. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16...- US$18.00
- US$18.00
- US$25.00
- Unit price
- per
-
VHF CAD/CAM Milling Bur 40mm Length with DLC Coat for Zirconia Block
Feature 100% compatible with VHF CAD/CAM system like R5, K5, S1, S2, S5, etc with 40mm total length. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 40 3 0.6 7...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR
Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 14 50 6 2.0 18 55 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
-
VHF 4axis CAD/CAM Tools 32mm Length for Milling Titanium, CoCr
Feature 100% compatible with the VHF 4axis CAD/CAM system like Z4, N4, etc. The tools are special for milling metal materials like titanium, CoCr Disc. 0.6mm, 1.0mm, 2.0mm is ball nose milling bur. 1.2F is flat-end for milling implant abutment. Size Details H(mm) L1(mm)...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Imes-Icore CAD/CAM Milling Bur 3mm Shank with DLC Coat for Zirconia Block
Feature 100% compatible with Imes-Icore CAD/CAM system like 250i with 3mm Shank DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48 3 2.5 20 48 3...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1000, RDP1009, RDP1004, RDP1002, RDP1006
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$10.00
- US$10.00
- US$12.50
- Unit price
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
Amann Girrbach CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
- Choosing a selection results in a full page refresh.