Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Фрезы Amann Girrbach с алмазным покрытием, специально для циркония

Фрезы Amann Girrbach с алмазным покрытием, специально для циркония

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Алмазное покрытие специально предназначено для фрезерования циркониевых дисков с хорошими характеристиками для фрезерования коронок на 500 единиц. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0...
US$24.00
US$24.00
US$30.00
Многоцелевой фрезы Amann Girrbach для фрезерования циркония, воска, PMMA и т. Д.

Многоцелевой фрезы Amann Girrbach для фрезерования циркония, воска, PMMA и т. Д.

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Эти mногоцелевой инструменты можно использовать для фрезерования большинства стоматологических материалов, таких как циркония, воск, PMMA, PEEK, мягкий металл и т. Д. С хорошей производительностью. Детали размера H(мм) L1(мм)...
US$20.00
US$20.00
US$25.00
Фрезы Amann Girrbach специально для PMMA, PEEK, чтобы избежать липкости

Фрезы Amann Girrbach специально для PMMA, PEEK, чтобы избежать липкости

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion2, Mikro и т. Д. Инструменты специально предназначены для фрезерования полимерных материалов, таких как PMMA, PEEK, с хорошими характеристиками, чтобы избежать липкости. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16...
US$22.00
US$22.00
US$27.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Фрезы Amann Girrbach для Emax, дисиликат лития

Фрезы Amann Girrbach для Emax, дисиликат лития

Feature 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro ic и т. Д. Инструменты производятся с алмазным зерном для обработки стеклокерамики, дисиликата лития, гибридной керамики и др. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43...
US$18.00
US$18.00
US$31.25
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Рекомендуется
  • Лидер продаж
  • От А до Я
  • От Я до А
  • По возрастанию цены
  • По убыванию цены
  • Сначала старые
  • Сначала новые
Сортировка

Сортировка:

  • Рекомендуется
  • Лидер продаж
  • От А до Я
  • От Я до А
  • По возрастанию цены
  • По убыванию цены
  • Сначала старые
  • Сначала новые
  • Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

    Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

    Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
    US$18.00
    US$18.00
    US$22.50
  • PrograMill PM7 Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    PrograMill PM7 Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with PrograMill PM7 CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 52 6 1.0 14 53 6 2.5 20 53 6 Have Questions? Contact...
    US$30.00
    US$30.00
    US$43.75
  • PrograMill PM7 CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    PrograMill PM7 CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    Feature 100% compatible with the PrograMill PM7 CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 40 6 1.0 8 45 6 1.5 12 45 6 2.0 12 45 6 3.0...
    US$25.00
    US$25.00
    US$31.25
  • Dental Lithium Disilicate Blocks (Glass Ceramics) C14 HT/LT (5 Pieces)

    Dental Lithium Disilicate Blocks (Glass Ceramics) C14 HT/LT (5 Pieces)

    Feature High translucency up to 62%, matching the esthetics of natural teeth Thanks the simple and fast process, patients can experience a same day restoration without the need of a second appointment Have Questions? Contact Us
    US$40.00
    US$40.00
    US$50.00
  • VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm)...
    US$18.00
    US$18.00
    US$22.50
  • VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    Feature 100% compatible with the VHF 4axis CAD/CAM system like K4, N4, etc with 35mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...
    US$18.00
    US$18.00
    US$22.50
  • Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$48.00
    US$48.00
    US$60.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Body

    Shofu Vintage Halo Porcelain for Metal 50g-Body

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • ARUM/Versamill 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    ARUM/Versamill 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ARUM CADCAM systems like 5X-200, 5X-450, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 14 55 6 1.0 16 55 6 1.5...
    US$22.00
    US$22.00
    US$27.50
  • ARUM/Versamill 4mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    ARUM/Versamill 4mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ARUM CADCAM systems like 5X-400, 5X-300, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 16 50 4 1.5...
    US$20.00
    US$20.00
    US$25.00
  • ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 42 4 1.5 10 43 4 2.0 12 44 4...
    US$20.00
    US$20.00
    US$25.00
  • Imes-Icore CAD/CAM Tools 3mm Shank for Milling Titanium, CoCr T1/T6 T2/T7 T4/T9

    Imes-Icore CAD/CAM Tools 3mm Shank for Milling Titanium, CoCr T1/T6 T2/T7 T4/T9

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 9 47 3 2.0 12 47 3 3.0...
    US$25.00
    US$25.00
    US$31.25
  • PrograMill PM3/5 Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    PrograMill PM3/5 Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 45 3 1.0 11 50 3 2.0...
    US$20.00
    US$20.00
    US$31.25
  • Wieland Select CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Wieland Select CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.7 7 40 3 1.0 16 40 3 2.5 20 40 3...
    US$24.00
    US$24.00
    US$30.00
  • PrograMill PM7 CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    PrograMill PM7 CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the PrograMill PM7 CAD/CAM. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 16 45 6 1.0 8 50 6 2.0 18 50 6 3.0 20...
    US$25.00
    US$25.00
    US$37.50
  • UP3D CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    UP3D CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, P55 etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4 0.6 8 50 4 1.0...
    US$24.00
    US$24.00
    US$30.00
  • Фрезы Wieland Zenotec Select для Emax, дисиликат лития

    Фрезы Wieland Zenotec Select для Emax, дисиликат лития

    Характеристика 100% совместимость с фрезерными станками Wieland Zenotec Select. Инструменты производятся с алмазным зерном для обработки стеклокерамики, дисиликата лития, гибридной керамики и др. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0 19 40 3 3.0 21 40...
    US$20.00
    US$20.00
    US$31.25
  • Фрезы ARUM с диаметром хвостовика 4мм и алмазным покрытием специально для циркония

    Фрезы ARUM с диаметром хвостовика 4мм и алмазным покрытием специально для циркония

    Характеристика 100% совместимость с фрезерными станками ARUM, такими как 5X-400, 5X-300 и т. Д. с диаметром хвостовика 4mm. Алмазное покрытие специально предназначено для фрезерования циркониевых дисков с хорошими характеристиками для фрезерования коронок на 500 единиц. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 10 45...
    US$24.00
    US$24.00
    US$30.00