-
Многоцелевой фрезы Wieland MINI для фрезерования циркония, воска, PMMA и т. Д.
Характеристика 100% совместимость с фрезерными станками Wieland Zenotec MINI. Эти mногоцелевой инструменты можно использовать для фрезерования большинства стоматологических материалов, таких как циркония, воск, PMMA, PEEK, мягкий металл и т. Д. С хорошей производительностью. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.3 16 35 3 0.7...- US$20.00
- US$20.00
- US$25.00
- Цена за единицу
- за
-
Многоцелевой фрезы Sirona MCX5 для фрезерования циркония, воска, PMMA и т. Д.
Характеристика 100% совместимость с системой Sirona MCX5 CAD/CAM. Эти mногоцелевой инструменты можно использовать для фрезерования большинства стоматологических материалов, таких как циркония, воск, PMMA, PEEK, мягкий металл и т. Д. С хорошей производительностью. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18...- US$20.00
- US$20.00
- US$25.00
- Цена за единицу
- за
-
Arum CAD/CAM Фрезерный бур 4мм хвостовик с DLC покрытием для циркония
Особенность 100% совместимость с системой ARUM CAD/CAM. DLC Coat может фрезеровыть около 150 единиц. (зависит от твердости циркониевого блока). Сведения о размере H(мм) L1(мм) L(мм) D(мм) 0.6 10 45 4 1.0 16 50 4 2.0 18 50 4 Есть вопросы?Свяжитесь с нами- US$16.00
- US$16.00
- US$20.00
- Цена за единицу
- за
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5959, RDP5954, RDP5952, RDP5956
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Цена за единицу
- за
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5409, RDP5404, RDP5402, RDP5406
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Цена за единицу
- за
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5159, RDP5154, RDP5152, RDP5156
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Цена за единицу
- за
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5979A, RDP5974A, RDP5977A, RDP5977B
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$10.00
- US$10.00
- US$12.50
- Цена за единицу
- за
-
2505275HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2502198HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2411274HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2409272HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- Цена за единицу
- за
-
2408274HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2407237HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2406239HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2404201HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2402185HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
2401142HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
4106201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
4103201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
-
4102145HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$7.50
- US$7.50
- US$10.00
- Цена за единицу
- за
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Цена за единицу
- за
Фрезы Amann Girrbach с алмазным покрытием, специально для циркония
Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Алмазное покрытие специально предназначено для фрезерования циркониевых дисков с хорошими характеристиками для фрезерования коронок на 500 единиц. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0...
- US$24.00
- US$24.00
- US$30.00
- Цена за единицу
- за
Многоцелевой фрезы Amann Girrbach для фрезерования циркония, воска, PMMA и т. Д.
Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Эти mногоцелевой инструменты можно использовать для фрезерования большинства стоматологических материалов, таких как циркония, воск, PMMA, PEEK, мягкий металл и т. Д. С хорошей производительностью. Детали размера H(мм) L1(мм)...
- US$20.00
- US$20.00
- US$25.00
- Цена за единицу
- за
Фрезы Amann Girrbach специально для PMMA, PEEK, чтобы избежать липкости
Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion2, Mikro и т. Д. Инструменты специально предназначены для фрезерования полимерных материалов, таких как PMMA, PEEK, с хорошими характеристиками, чтобы избежать липкости. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16...
- US$22.00
- US$22.00
- US$27.50
- Цена за единицу
- за
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Цена за единицу
- за
Фрезы Amann Girrbach для Emax, дисиликат лития
Feature 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro ic и т. Д. Инструменты производятся с алмазным зерном для обработки стеклокерамики, дисиликата лития, гибридной керамики и др. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43...
- US$18.00
- US$18.00
- US$31.25
- Цена за единицу
- за
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Цена за единицу
- за
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Цена за единицу
- за
- Выбор выделенного элемента приводит к полному обновлению страницы.