Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Многоцелевой фрезы Amann Girrbach для фрезерования циркония, воска, PMMA и т. Д.

Многоцелевой фрезы Amann Girrbach для фрезерования циркония, воска, PMMA и т. Д.

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Эти mногоцелевой инструменты можно использовать для фрезерования большинства стоматологических материалов, таких как циркония, воск, PMMA, PEEK, мягкий металл и т. Д. С хорошей производительностью. Детали размера H(мм) L1(мм)...
US$20.00
US$20.00
US$25.00
Фрезы Amann Girrbach для Emax, дисиликат лития

Фрезы Amann Girrbach для Emax, дисиликат лития

Feature 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro ic и т. Д. Инструменты производятся с алмазным зерном для обработки стеклокерамики, дисиликата лития, гибридной керамики и др. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43...
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Фрезы Amann Girrbach с алмазным покрытием, специально для циркония

Фрезы Amann Girrbach с алмазным покрытием, специально для циркония

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Алмазное покрытие специально предназначено для фрезерования циркониевых дисков с хорошими характеристиками для фрезерования коронок на 500 единиц. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0...
US$24.00
US$24.00
US$30.00
Фрезы Amann Girrbach специально для PMMA, PEEK, чтобы избежать липкости

Фрезы Amann Girrbach специально для PMMA, PEEK, чтобы избежать липкости

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion2, Mikro и т. Д. Инструменты специально предназначены для фрезерования полимерных материалов, таких как PMMA, PEEK, с хорошими характеристиками, чтобы избежать липкости. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16...
US$22.00
US$22.00
US$27.50
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Рекомендуется
  • Наиболее актуальные
  • Лидер продаж
  • От А до Я
  • От Я до А
  • По возрастанию цены
  • По убыванию цены
  • Сначала старые
  • Сначала новые
Сортировка

Сортировка:

  • Рекомендуется
  • Наиболее актуальные
  • Лидер продаж
  • От А до Я
  • От Я до А
  • По возрастанию цены
  • По убыванию цены
  • Сначала старые
  • Сначала новые
  • YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite

    YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite

    Feature 100% compatible with the YUCERA YRC-6X CAD/CAM system  with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 10 50 4 2.5 16...
    US$20.00
    US$20.00
  • Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block

    Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block

    Feature 100% compatible with the Dentium Rainbow-mill CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 43 3 1.0 16 50 3 2.0 16 50 3...
    US$24.00
    US$24.00
    US$30.00
  • XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...
    US$20.00
    US$20.00
    US$25.00
  • DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking

    DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking

    Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...
    US$20.00
    US$20.00
    US$25.00
  • Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc

    Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc

    Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools with AlTiN coat is special to mill metal disc like titanium, Cobalt Chrome,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 3.0 15...
    US$24.00
    US$24.00
    US$30.00
  • Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...
    US$24.00
    US$24.00
    US$30.00
  • Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$20.00
    US$20.00
    US$25.00
  • Фрезы Wieland Zenotec Select для Emax, дисиликат лития

    Фрезы Wieland Zenotec Select для Emax, дисиликат лития

    Характеристика 100% совместимость с фрезерными станками Wieland Zenotec Select. Инструменты производятся с алмазным зерном для обработки стеклокерамики, дисиликата лития, гибридной керамики и др. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0 19 40 3 3.0 21 40...
    US$20.00
    US$20.00
    US$31.25
  • Фрезы ZirkonZahn с диаметром хвостовика 3мм и алмазным покрытием специально для циркония

    Фрезы ZirkonZahn с диаметром хвостовика 3мм и алмазным покрытием специально для циркония

    Характеристика 100% совместимость с фрезерными станками ZirkonZahn, такими как M5 и т. Д. с диаметром хвостовика 3mm. Алмазное покрытие специально предназначено для фрезерования циркониевых дисков с хорошими характеристиками для фрезерования коронок на 500 единиц. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.5 6 57 3...
    US$24.00
    US$24.00
    US$30.00
  • ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 4 57 3 1.5 16 57 3 Have Questions? Contact Us
    US$20.00
    US$20.00
    US$25.00
  • ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 57 3 1.0 12 57 3 2.0 18...
    US$20.00
    US$20.00
    US$27.50
  • Многоцелевой фрезы Sirona MCX5 для фрезерования циркония, воска, PMMA и т. Д.

    Многоцелевой фрезы Sirona MCX5 для фрезерования циркония, воска, PMMA и т. Д.

    Характеристика 100% совместимость с системой Sirona MCX5 CAD/CAM. Эти mногоцелевой инструменты можно использовать для фрезерования большинства стоматологических материалов, таких как циркония, воск, PMMA, PEEK, мягкий металл и т. Д. С хорошей производительностью. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18...
    US$20.00
    US$20.00
    US$25.00
  • ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.

    ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are one flute design special for milling PMMA, Wax, PEEK. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14...
    От US$16.00
    От US$16.00
    US$20.00
  • Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia

    Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia

    Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...
    US$20.00
    US$20.00
    US$30.00
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5159, RDP5154, RDP5152, RDP5156

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5159, RDP5154, RDP5152, RDP5156

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$7.00
    US$7.00
    US$8.75
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5979A, RDP5974A, RDP5977A, RDP5977B

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5979A, RDP5974A, RDP5977A, RDP5977B

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$10.00
    US$10.00
    US$12.50
  • 4106201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    4106201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$10.00
    US$10.00
    US$10.00
  • 5006257HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    5006257HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$10.00
    US$10.00
    US$10.00
  • 5005239HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    5005239HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$10.00
    US$10.00
    US$10.00