Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Ferramentas Amann Girrbach com casaco de diamante especial para zircônia

Ferramentas Amann Girrbach com casaco de diamante especial para zircônia

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion 2, Mikro, etc. O revestimento de diamante é especial para fresar discos de zircônia com bom desempenho para fresar cerca de 500 unidades de coroas. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6...
US$24.00
US$24.00
US$30.00
Ferramentas multiuso Amann Girrbach para zircônia, cera, PMMA, etc.

Ferramentas multiuso Amann Girrbach para zircônia, cera, PMMA, etc.

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro, etc. As ferramentas multifuncionais podem ser usadas para fresar a maioria dos materiais odontológicos como zircônia, cera, PMMA, metal sinterizado, etc. com bom desempenho. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.3...
US$20.00
US$20.00
US$25.00
Ferramentas Amann Girrbach especiais para PMMA, PEEK, para evitar aderência

Ferramentas Amann Girrbach especiais para PMMA, PEEK, para evitar aderência

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro, etc. As ferramentas são especiais para fresar materiais resinosos como PMMA, PEEK com bom desempenho para evitar pegajosidade. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47...
US$22.00
US$22.00
US$27.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Fresa CAD/CAM para sistemas Amann Girrbach para dissilicato de lítio, cerâmica de vidro

Fresa CAD/CAM para sistemas Amann Girrbach para dissilicato de lítio, cerâmica de vidro

Característica 100% compatível com o sistema CAD/CAM Amann Girrbach como Motion 2, Mikro ic, Matick, etc. As ferramentas são produzidas com grão de diamante para usinagem de vitrocerâmica, dissilicato de lítio, cerâmica híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$31.25
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Ferramentas flat-end Amann Girrbach CAD/CAM Especiais para Implante de Zircônia de Fresagem

Ferramentas flat-end Amann Girrbach CAD/CAM Especiais para Implante de Zircônia de Fresagem

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro .etc. Casaco DLC com especial de ponta plana para implante de zircônia de fresagem Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3 Tem perguntas? Contato
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Em destaque
  • Mais vendidos
  • Ordem alfabética, A–Z
  • Ordem alfabética, Z–A
  • Preço, ordem crescente
  • Preço, ordem decrescente
  • Data, mais antiga primeiro
  • Data, mais recente primeiro
Organizar

Organizar por:

  • Em destaque
  • Mais vendidos
  • Ordem alfabética, A–Z
  • Ordem alfabética, Z–A
  • Preço, ordem crescente
  • Preço, ordem decrescente
  • Data, mais antiga primeiro
  • Data, mais recente primeiro
  • Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

    Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

    Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
    US$18.00
    US$18.00
    US$22.50
  • PrograMill PM7 Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    PrograMill PM7 Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with PrograMill PM7 CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 52 6 1.0 14 53 6 2.5 20 53 6 Have Questions? Contact...
    US$30.00
    US$30.00
    US$43.75
  • PrograMill PM7 CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    PrograMill PM7 CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    Feature 100% compatible with the PrograMill PM7 CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 40 6 1.0 8 45 6 1.5 12 45 6 2.0 12 45 6 3.0...
    US$25.00
    US$25.00
    US$31.25
  • Dental Lithium Disilicate Blocks (Glass Ceramics) C14 HT/LT (5 Pieces)

    Dental Lithium Disilicate Blocks (Glass Ceramics) C14 HT/LT (5 Pieces)

    Feature High translucency up to 62%, matching the esthetics of natural teeth Thanks the simple and fast process, patients can experience a same day restoration without the need of a second appointment Have Questions? Contact Us
    US$40.00
    US$40.00
    US$50.00
  • VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm)...
    US$18.00
    US$18.00
    US$22.50
  • VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    Feature 100% compatible with the VHF 4axis CAD/CAM system like K4, N4, etc with 35mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...
    US$18.00
    US$18.00
    US$22.50
  • Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$48.00
    US$48.00
    US$60.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Body

    Shofu Vintage Halo Porcelain for Metal 50g-Body

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • ARUM/Versamill 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    ARUM/Versamill 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ARUM CADCAM systems like 5X-200, 5X-450, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 14 55 6 1.0 16 55 6 1.5...
    US$22.00
    US$22.00
    US$27.50
  • ARUM/Versamill 4mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    ARUM/Versamill 4mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the ARUM CADCAM systems like 5X-400, 5X-300, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 16 50 4 1.5...
    US$20.00
    US$20.00
    US$25.00
  • ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 42 4 1.5 10 43 4 2.0 12 44 4...
    US$20.00
    US$20.00
    US$25.00
  • Imes-Icore CAD/CAM Tools 3mm Shank for Milling Titanium, CoCr T1/T6 T2/T7 T4/T9

    Imes-Icore CAD/CAM Tools 3mm Shank for Milling Titanium, CoCr T1/T6 T2/T7 T4/T9

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 9 47 3 2.0 12 47 3 3.0...
    US$25.00
    US$25.00
    US$31.25
  • Fresa CAD/CAM para sistemas PrograMill PM3/5(Haste 3mm) para dissilicato de lítio, cerâmica de vidro

    Fresa CAD/CAM para sistemas PrograMill PM3/5(Haste 3mm) para dissilicato de lítio, cerâmica de vidro

    Característica 100% compatível com o sistema PrograMill PM3/5. As ferramentas são produzidas com grão de diamante para usinagem de vitrocerâmica, dissilicato de lítio, cerâmica híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.5 8 45 3 1.0 11 50 3 2.0 18 50...
    US$20.00
    US$20.00
    US$31.25
  • Wieland Select CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Wieland Select CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.7 7 40 3 1.0 16 40 3 2.5 20 40 3...
    US$24.00
    US$24.00
    US$30.00
  • Fresa CAD/CAM para sistemas PrograMill PM7(Haste 6mm) para dissilicato de lítio, cerâmica de vidro

    Fresa CAD/CAM para sistemas PrograMill PM7(Haste 6mm) para dissilicato de lítio, cerâmica de vidro

    Característica 100% compatível com o sistema PrograMill PM7. As ferramentas são produzidas com grão de diamante para usinagem de vitrocerâmica, dissilicato de lítio, cerâmica híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.5 16 45 6 1.0 8 50 6 2.0 18 50...
    US$25.00
    US$25.00
    US$37.50
  • UP3D CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    UP3D CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, P55 etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4 0.6 8 50 4 1.0...
    US$24.00
    US$24.00
    US$30.00
  • Fresa CAD/CAM para sistemas Wieland Zenotec Select para dissilicato de lítio, cerâmica de vidro

    Fresa CAD/CAM para sistemas Wieland Zenotec Select para dissilicato de lítio, cerâmica de vidro

    Característica 100% compatível com o sistema CAD/CAM Wieland Zenotec Select. As ferramentas são produzidas com grão de diamante para usinagem de vitrocerâmica, dissilicato de lítio, cerâmica híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0...
    US$20.00
    US$20.00
    US$31.25
  • Ferramentas ARUM com diâmetro de haste de 4mm e casaco de diamante especial para zircônia

    Ferramentas ARUM com diâmetro de haste de 4mm e casaco de diamante especial para zircônia

    Característica 100% compatível com o sistema CAD/CAM ARUM como 5X-400, 5X-300, etc. O revestimento de diamante é especial para fresar discos de zircônia com bom desempenho para fresar cerca de 500 unidades de coroas. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 10 45...
    US$24.00
    US$24.00
    US$30.00