Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Ferramentas multiuso Amann Girrbach para zircônia, cera, PMMA, etc.

Ferramentas multiuso Amann Girrbach para zircônia, cera, PMMA, etc.

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro, etc. As ferramentas multifuncionais podem ser usadas para fresar a maioria dos materiais odontológicos como zircônia, cera, PMMA, metal sinterizado, etc. com bom desempenho. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.3...
US$20.00
US$20.00
US$25.00
Fresa CAD/CAM para sistemas Amann Girrbach para dissilicato de lítio, cerâmica de vidro

Fresa CAD/CAM para sistemas Amann Girrbach para dissilicato de lítio, cerâmica de vidro

Característica 100% compatível com o sistema CAD/CAM Amann Girrbach como Motion 2, Mikro ic, Matick, etc. As ferramentas são produzidas com grão de diamante para usinagem de vitrocerâmica, dissilicato de lítio, cerâmica híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$22.50
Ferramentas Amann Girrbach com casaco de diamante especial para zircônia

Ferramentas Amann Girrbach com casaco de diamante especial para zircônia

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion 2, Mikro, etc. O revestimento de diamante é especial para fresar discos de zircônia com bom desempenho para fresar cerca de 500 unidades de coroas. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6...
US$24.00
US$24.00
US$30.00
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Ferramentas Amann Girrbach especiais para PMMA, PEEK, para evitar aderência

Ferramentas Amann Girrbach especiais para PMMA, PEEK, para evitar aderência

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro, etc. As ferramentas são especiais para fresar materiais resinosos como PMMA, PEEK com bom desempenho para evitar pegajosidade. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47...
US$22.00
US$22.00
US$27.50
Ferramentas flat-end Amann Girrbach CAD/CAM Especiais para Implante de Zircônia de Fresagem

Ferramentas flat-end Amann Girrbach CAD/CAM Especiais para Implante de Zircônia de Fresagem

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro .etc. Casaco DLC com especial de ponta plana para implante de zircônia de fresagem Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3 Tem perguntas? Contato
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Em destaque
  • Mais relevantes
  • Mais vendidos
  • Ordem alfabética, A–Z
  • Ordem alfabética, Z–A
  • Preço, ordem crescente
  • Preço, ordem decrescente
  • Data, mais antiga primeiro
  • Data, mais recente primeiro
Organizar

Organizar por:

  • Em destaque
  • Mais relevantes
  • Mais vendidos
  • Ordem alfabética, A–Z
  • Ordem alfabética, Z–A
  • Preço, ordem crescente
  • Preço, ordem decrescente
  • Data, mais antiga primeiro
  • Data, mais recente primeiro
  • 2027277HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2027277HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Fine-Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes...
    US$10.00
    US$10.00
    US$10.00
  • 2025277HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2025277HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Fine-Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes...
    US$10.00
    US$10.00
    US$10.00
  • 2014227HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2014227HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Fine-Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes...
    US$10.00
    US$10.00
    US$10.00
  • 2009200HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2009200HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Fine-Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes...
    US$10.00
    US$10.00
    US$10.00
  • 2007198HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2007198HP-Cross Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Fine-Suitable for all dental materials. It smoothens the surface and it enables accurate operation on any structure. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes...
    US$10.00
    US$10.00
    US$10.00
  • 3012237HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    3012237HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....
    US$10.00
    US$10.00
    US$10.00
  • 3010227HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    3010227HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....
    US$10.00
    US$10.00
    US$10.00
  • 3004198HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    3004198HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....
    US$10.00
    US$10.00
    US$10.00
  • 7020277HP-Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    7020277HP-Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Standard-For all dental materials, the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces rework. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • 7003001HP- Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    7003001HP- Plain Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Standard-For all dental materials, the plain cut enables a smooth cutting pattern, particularly on resins, and thus reduces rework. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • 6005292HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    6005292HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Super Fine-Smooth cutting pattern on all alloys and composites,reduces rework - especially suitable on prosthetic appliances for papilla shaping. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • 6001145HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    6001145HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Super Fine-Smooth cutting pattern on all alloys and composites,reduces rework - especially suitable on prosthetic appliances for papilla shaping. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$10.00
    US$10.00
    US$10.00
  • Yenadent Ferramentas CAD/CAM para fresar titânio, CoCr

    Yenadent Ferramentas CAD/CAM para fresar titânio, CoCr

    Característica 100% compatível com o Yenadent Sistema CAD/CAM. As ferramentas são especiais para fresar materiais metálicos como titânio, Disco CoCr. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 1.0 10 40 4 1.5 10 40 4 2.0 12 40 4 3.0 15 40 4 Tem...
    US$25.00
    US$25.00
    US$31.25
  • Fresa CAD/CAM para sistemas Yenadent para dissilicato de lítio, cerâmica de vidro

    Fresa CAD/CAM para sistemas Yenadent para dissilicato de lítio, cerâmica de vidro

    Característica 100% compatível com o sistema CAD/CAM Yenadent. As ferramentas são produzidas com grão de diamante para usinagem de cerâmica de vidro, desilicação de lítio, Cerâmica Híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 12 41 4 1.0 6 41 4 2.0...
    US$20.00
    US$20.00
    US$31.25
  • Flat-end Yenadent Ferramentas CAD/CAM para fresar titânio, CoCr

    Flat-end Yenadent Ferramentas CAD/CAM para fresar titânio, CoCr

    Característica 100% compatível com oYenadent Sistema CAD/CAM 5X-200. As ferramentas são especiais para fresar materiais metálicos como titânio, Disco CoCr. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 1.4 10 37 4 1.8 10 37 4 Tem perguntas? Contato
    US$25.00
    US$25.00
    US$31.25
  • Fresa CAD/CAM para sistemas Dentium Rainbow(Haste 3mm) para dissilicato de lítio, cerâmica de vidro

    Fresa CAD/CAM para sistemas Dentium Rainbow(Haste 3mm) para dissilicato de lítio, cerâmica de vidro

    Característica 100% compatível com o sistema CAD/CAM de moinho de arco-íris Dentium. As ferramentas são produzidas com grão de diamante para usinagem de cerâmica de vidro, desilicação de lítio, Cerâmica Híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 6 40 3 1.0...
    US$20.00
    US$20.00
    US$31.25
  • Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block

    Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block

    Feature 100% compatible with the Dentium Rainbow-mill CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 43 3 1.0 16 50 3 2.0 16 50 3...
    US$24.00
    US$24.00
    US$30.00
  • XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...
    US$20.00
    US$20.00
    US$25.00
  • XTCERA Xmill 300 Xmill 500 Milling Cutters 4mm Shank with Diamond Coat Special for Zirconia

    XTCERA Xmill 300 Xmill 500 Milling Cutters 4mm Shank with Diamond Coat Special for Zirconia

    Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill 500, X-Mill 580, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6...
    De US$22.00
    De US$22.00
    US$30.00
  • DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking

    DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking

    Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...
    US$20.00
    US$20.00
    US$25.00