Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Ferramentas multiuso Amann Girrbach para zircônia, cera, PMMA, etc.

Ferramentas multiuso Amann Girrbach para zircônia, cera, PMMA, etc.

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro, etc. As ferramentas multifuncionais podem ser usadas para fresar a maioria dos materiais odontológicos como zircônia, cera, PMMA, metal sinterizado, etc. com bom desempenho. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.3...
US$20.00
US$20.00
US$25.00
Fresa CAD/CAM para sistemas Amann Girrbach para dissilicato de lítio, cerâmica de vidro

Fresa CAD/CAM para sistemas Amann Girrbach para dissilicato de lítio, cerâmica de vidro

Característica 100% compatível com o sistema CAD/CAM Amann Girrbach como Motion 2, Mikro ic, Matick, etc. As ferramentas são produzidas com grão de diamante para usinagem de vitrocerâmica, dissilicato de lítio, cerâmica híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$22.50
Ferramentas Amann Girrbach com casaco de diamante especial para zircônia

Ferramentas Amann Girrbach com casaco de diamante especial para zircônia

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion 2, Mikro, etc. O revestimento de diamante é especial para fresar discos de zircônia com bom desempenho para fresar cerca de 500 unidades de coroas. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6...
US$24.00
US$24.00
US$30.00
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Ferramentas Amann Girrbach especiais para PMMA, PEEK, para evitar aderência

Ferramentas Amann Girrbach especiais para PMMA, PEEK, para evitar aderência

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro, etc. As ferramentas são especiais para fresar materiais resinosos como PMMA, PEEK com bom desempenho para evitar pegajosidade. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47...
US$22.00
US$22.00
US$27.50
Ferramentas flat-end Amann Girrbach CAD/CAM Especiais para Implante de Zircônia de Fresagem

Ferramentas flat-end Amann Girrbach CAD/CAM Especiais para Implante de Zircônia de Fresagem

Característica 100% compatível com o sistema Amann Girrbach CAD/CAM como Motion2, Mikro .etc. Casaco DLC com especial de ponta plana para implante de zircônia de fresagem Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3 Tem perguntas? Contato
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Em destaque
  • Mais relevantes
  • Mais vendidos
  • Ordem alfabética, A–Z
  • Ordem alfabética, Z–A
  • Preço, ordem crescente
  • Preço, ordem decrescente
  • Data, mais antiga primeiro
  • Data, mais recente primeiro
Organizar

Organizar por:

  • Em destaque
  • Mais relevantes
  • Mais vendidos
  • Ordem alfabética, A–Z
  • Ordem alfabética, Z–A
  • Preço, ordem crescente
  • Preço, ordem decrescente
  • Data, mais antiga primeiro
  • Data, mais recente primeiro
  • ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    ARUM CAD/CAM Tools 4mm Shank Special for Milling Metal like Titanium, CoCr, etc.

    Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 42 4 1.5 10 43 4 2.0 12 44 4...
    US$20.00
    US$20.00
    US$25.00
  • Fresa CAD/CAM para sistemas ARUM(Haste 6mm) para dissilicato de lítio, cerâmica de vidro

    Fresa CAD/CAM para sistemas ARUM(Haste 6mm) para dissilicato de lítio, cerâmica de vidro

    Característica 100% compatível com o sistema Dentium CAD/CAM. As ferramentas são produzidas com grão de diamante para usinagem de cerâmica de vidro, desilicação de lítio, Cerâmica Híbrida, etc. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.6 6 50 6 1.0 10 50 6 2.0...
    US$20.00
    US$20.00
    US$31.25
  • 1043275HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    1043275HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For coarse abrasion on chrome - cobalt alloys, precious metall alloys, chrome - nickel alloys, model cast alloys, acrylics. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance....
    US$10.00
    US$10.00
    US$10.00
  • 1042272HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    1042272HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For coarse abrasion on chrome - cobalt alloys, precious metall alloys, chrome - nickel alloys, model cast alloys, acrylics. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance....
    US$10.00
    US$10.00
    US$10.00
  • UP3D CADCAM Tools Special for PMMA, PEEK, to Avoid Sticking

    UP3D CADCAM Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4 0.6 8 50 4 1.0...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • Ferramentas multiuso ZirkonZahn Manual para zircônia, cera, PMMA, etc.

    Ferramentas multiuso ZirkonZahn Manual para zircônia, cera, PMMA, etc.

    Característica 100% compatível com o sistema CAD/CAM ZirkonZahn Manual. As ferramentas multifuncionais podem ser usadas para fresar a maioria dos materiais odontológicos como zircônia, cera, PMMA, metal sinterizado, etc. com bom desempenho. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 1.0 5 47 3 2.0...
    US$20.00
    US$20.00
    US$25.00
  • Ferramentas multiuso Wieland MINI para zircônia, cera, PMMA, etc.

    Ferramentas multiuso Wieland MINI para zircônia, cera, PMMA, etc.

    Característica 100% compatível com o sistema CAD/CAM Wieland MINI. As ferramentas multifuncionais podem ser usadas para fresar a maioria dos materiais odontológicos como zircônia, cera, PMMA, metal sinterizado, etc. com bom desempenho. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 0.3 16 35 3 0.7...
    US$20.00
    US$20.00
    US$25.00
  • Dental Four DF400/DF600 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    Dental Four DF400/DF600 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 50 6 2.5 20...
    US$25.00
    US$25.00
    US$31.25
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5059, RDP5054, RDP5052, RDP5056, RDP5057A

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5059, RDP5054, RDP5052, RDP5056, RDP5057A

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$7.00
    US$7.00
    US$8.75
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5069, RDP5064, RDP5062, RDP5066

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5069, RDP5064, RDP5062, RDP5066

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$7.00
    US$7.00
    US$8.75
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1000, RDP1009, RDP1004, RDP1002, RDP1006

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1000, RDP1009, RDP1004, RDP1002, RDP1006

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$10.00
    US$10.00
    US$12.50
  • Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1109, ZDG1009, ZDG1059

    Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1109, ZDG1009, ZDG1059

    Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...
    US$9.00
    US$9.00
    US$11.25
  • 4105292HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    4105292HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$10.00
    US$10.00
    US$10.00
  • 4104289HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    4104289HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$10.00
    US$10.00
    US$10.00
  • 5010275HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    5010275HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$10.00
    US$10.00
    US$10.00
  • 6003201HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    6003201HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Super Fine-Smooth cutting pattern on all alloys and composites,reduces rework - especially suitable on prosthetic appliances for papilla shaping. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 18 50 6 2.5 22 50 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$31.25
  • ARUM FERRAMENTAS DE HASTE CAD/CAM 6mm Flat-End para Fresar titânio, COCR

    ARUM FERRAMENTAS DE HASTE CAD/CAM 6mm Flat-End para Fresar titânio, COCR

    Característica 100% compatível com o ARUM Sistema CAD/CAM como 5X-200, 5X-450, 5X-400, etc com diâmetro de haste de 6mm. As ferramentas são especiais para estruturas de implantes metálicos. Detalhes de tamanho H(mm) L1(mm) L(mm) D(mm) 1.5 8 50 6 2.0 18 55 6 Tem...
    US$22.00
    US$22.00
    US$27.50
  • 2504201HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2504201HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...
    US$10.00
    US$10.00
    US$10.00