-
XTCERA CADCAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...- US$20.00
- US$20.00
- US$25.00
- Prix unitaire
- par
-
XTCERA CADCAM 4mm Shank Tools with Diamond Coat Special for Milling Zirconia Block
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill 500, X-Mill 580, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6...- US$24.00
- US$24.00
- US$30.00
- Prix unitaire
- par
-
XTCERA CADCAM Tools 6mm Shank Carbide for PMMA, PEEK, Wax, Soft Metal,etc.
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 600SE, X-Mill 600, etc. The carbide tools can be used for milling most dental materials like wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 48...- US$20.00
- US$20.00
- US$25.00
- Prix unitaire
- par
-
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
-
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
-
DEPRAG 6mm Shank CADCAM Tools Special for PMMA, PEEK, Wax
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are special for milling PMMA, PEEK, Wax. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 16 50 6 2.0 20 50 6 1.5(Flat) 18 50...- US$24.00
- US$24.00
- US$30.00
- Prix unitaire
- par
-
DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...- US$20.00
- US$20.00
- US$25.00
- Prix unitaire
- par
-
Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc
Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools with AlTiN coat is special to mill metal disc like titanium, Cobalt Chrome,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 3.0 15...- US$24.00
- US$24.00
- US$30.00
- Prix unitaire
- par
-
DOF Craft CAD/CAM Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16 40 4 2.0 16 40...- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
-
PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Carbide single flute is a design special for plastic materials to lower the cutting resistant and smoother surface finishing. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 50 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
-
DEPRAG CADCAM Tools 6mm Shank with AlTiN Coat for Milling Titanium, CoCr
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 3.0-Roto 12.5 50 6 2.0-Roto 12.5 50 6 1.5-Roto 8 50 6...- US$25.00
- US$25.00
- US$31.25
- Prix unitaire
- par
-
DEPRAG Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 10 50 6...- US$25.00
- US$25.00
- US$31.25
- Prix unitaire
- par
-
DEPRAG CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 6 50 4 0.6 15...- US$24.00
- US$24.00
- US$30.00
- Prix unitaire
- par
-
Imes-Icore 3mm Shank Tools Single Flute T11, T12 for Milling PMMA, PEEK, Wax
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, 450i, COREITEC one, etc with 3mm shank. The single blade tools can be used for milling PMMA, PEEK, wax discs with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0(Single Blade) 14 48...- US$20.00
- US$20.00
- US$25.00
- Prix unitaire
- par
-
ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.
Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14 47 4...- From US$16.00
- From US$16.00
- US$20.00
- Prix unitaire
- par
-
ZirkonZahn 6mm Shank CADCAM Tools Single Flute for Milling PMMA, PEEK
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 14 50 6 2.0 18...- US$25.00
- US$25.00
- US$31.25
- Prix unitaire
- par
-
Dental Four DF400/DF600 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 50 6 2.5 20...- US$25.00
- US$25.00
- US$31.25
- Prix unitaire
- par
-
Dental Four DF400/DF600 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 16 50 6 2.5...- US$22.00
- US$22.00
- US$27.50
- Prix unitaire
- par
-
Aidite AMW-400 Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 50 6 1.0 8 50 6 2.5...- US$25.00
- US$25.00
- US$31.25
- Prix unitaire
- par
-
Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...- US$24.00
- US$24.00
- US$30.00
- Prix unitaire
- par
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
Outils CAD/CAM Amann Girrbach avec revêtement diamant spécial pour zircone
Caractéristique 100% compatible avec le système CAD/CAM Amann Girrbach comme Motion 2, Mikro ic, Matick, etc. La couche de diamant est spéciale pour le fraisage de disques en zircone avec de bonnes performances pour fraiser environ 500 unités de couronnes. Détails de taille H(mm)...
- US$24.00
- US$24.00
- US$30.00
- Prix unitaire
- par
Outils polyvalents Amann Girrbach pour zircone, cire, PMMA, etc.
Caractéristique 100% compatible avec le système CAD/CAM Amann Girrbach comme Motion 2, Mikro, etc. Les outils polyvalents peuvent être utilisés pour fraiser la plupart des matériaux dentaires comme la zircone, la cire, le PMMA, le PEEK, le métal fritté, etc. avec de bonnes performances....
- US$20.00
- US$20.00
- US$25.00
- Prix unitaire
- par
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prix unitaire
- par
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
Outils CAD/CAM Amann Girrbach pour disilicate de lithium, vitro-céramique
Caractéristique 100% compatible avec le système CAD/CAM Amann Girrbach comme Motion 2, Mikro ic, Matick, etc. Les outils sont fabriqués avec des grains de diamant pour l'usinage de la vitro-céramique, disilicate de lithium, etc. Détails de taille H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$31.25
- Prix unitaire
- par
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prix unitaire
- par
- Le choix d'une sélection entraîne l'actualisation de la page entière.