Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Outils CAD/CAM Amann Girrbach avec revêtement diamant spécial pour zircone

Outils CAD/CAM Amann Girrbach avec revêtement diamant spécial pour zircone

Caractéristique 100% compatible avec le système CAD/CAM Amann Girrbach comme Motion 2, Mikro ic, Matick, etc. La couche de diamant est spéciale pour le fraisage de disques en zircone avec de bonnes performances pour fraiser environ 500 unités de couronnes. Détails de taille H(mm)...
US$24.00
US$24.00
US$30.00
Outils polyvalents Amann Girrbach pour zircone, cire, PMMA, etc.

Outils polyvalents Amann Girrbach pour zircone, cire, PMMA, etc.

Caractéristique 100% compatible avec le système CAD/CAM Amann Girrbach comme Motion 2, Mikro, etc. Les outils polyvalents peuvent être utilisés pour fraiser la plupart des matériaux dentaires comme la zircone, la cire, le PMMA, le PEEK, le métal fritté, etc. avec de bonnes performances....
US$20.00
US$20.00
US$25.00
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$22.00
US$22.00
US$27.50
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Outils CAD/CAM Amann Girrbach pour disilicate de lithium, vitro-céramique

Outils CAD/CAM Amann Girrbach pour disilicate de lithium, vitro-céramique

Caractéristique 100% compatible avec le système CAD/CAM Amann Girrbach comme Motion 2, Mikro ic, Matick, etc. Les outils sont fabriqués avec des grains de diamant pour l'usinage de la vitro-céramique, disilicate de lithium, etc. Détails de taille H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
US$18.00
US$18.00
US$31.25
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • En vedette
  • Meilleures ventes
  • Alphabétique, de A à Z
  • Alphabétique, de Z à A
  • Prix: faible à élevé
  • Prix: élevé à faible
  • Date, de la plus ancienne à la plus récente
  • Date, de la plus récente à la plus ancienne
Sort

Trier par:

  • En vedette
  • Meilleures ventes
  • Alphabétique, de A à Z
  • Alphabétique, de Z à A
  • Prix: faible à élevé
  • Prix: élevé à faible
  • Date, de la plus ancienne à la plus récente
  • Date, de la plus récente à la plus ancienne
  • Outils Cerec3/InLab Compact pour disilicate de lithium, vitro-céramique

    Outils Cerec3/InLab Compact pour disilicate de lithium, vitro-céramique

    Caractéristique 100% compatible avec le système CAD/CAM Sirona Cerec3 Compact and InLab Compact. Les outils sont fabriqués avec des grains de diamant pour l'usinage de la vitro-céramique, disilicate de lithium, etc. Avoir des questions? Nous contacter
    US$18.00
    US$18.00
    US$22.50
  • DOF Craft CAD/CAM Tools Special for PMMA, PEEK, to Avoid Sticking

    DOF Craft CAD/CAM Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16 40 4 2.0 16 40...
    US$18.00
    US$18.00
    US$22.50
  • UP3D CADCAM Tools Special for PMMA, PEEK, to Avoid Sticking

    UP3D CADCAM Tools Special for PMMA, PEEK, to Avoid Sticking

    Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4 0.6 8 50 4 1.0...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • Outils polyvalents ZirkonZahn Manual pour zircone, cire, PMMA, etc.

    Outils polyvalents ZirkonZahn Manual pour zircone, cire, PMMA, etc.

    Caractéristique 100% compatible avec le système CAD/CAM ZirkonZahn Manual. Les outils polyvalents peuvent être utilisés pour fraiser la plupart des matériaux dentaires comme la zircone, la cire, le PMMA, le PEEK, le métal fritté, etc. avec de bonnes performances. Détails de taille H(mm) L1(mm)...
    US$20.00
    US$20.00
    US$25.00
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5069, RDP5064, RDP5062, RDP5066

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5069, RDP5064, RDP5062, RDP5066

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$7.00
    US$7.00
    US$8.75
  • Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1000, RDP1009, RDP1004, RDP1002, RDP1006

    Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1000, RDP1009, RDP1004, RDP1002, RDP1006

    Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....
    US$10.00
    US$10.00
    US$12.50
  • Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5909, ZDG5959, ZDG5199, ZDG5559, ZDG5599

    Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5909, ZDG5959, ZDG5199, ZDG5559, ZDG5599

    Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...
    US$8.00
    US$8.00
    US$10.00
  • Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1139

    Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG1139

    Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...
    US$10.00
    US$10.00
    US$12.50
  • 4105292HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    4105292HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$7.50
    US$7.50
    US$10.00
  • 4104289HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    4104289HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$7.50
    US$7.50
    US$10.00
  • 5010275HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    5010275HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$7.50
    US$7.50
    US$10.00
  • 5002200HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    5002200HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...
    US$7.50
    US$7.50
    US$10.00
  • 6003201HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    6003201HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Super Fine-Smooth cutting pattern on all alloys and composites,reduces rework - especially suitable on prosthetic appliances for papilla shaping. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Imes-Icore CAD/CAM T80/T81 6mm Shank Drilling Tools for Machining Titanium, COCR

    Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 18 50 6 2.5 22 50 6 Have Questions? Contact Us
    US$22.00
    US$22.00
    US$31.25
  • Outils polyvalents Imes-Icore avec tige de 3mm de diamètre pour zircone, cire, PMMA, etc.

    Outils polyvalents Imes-Icore avec tige de 3mm de diamètre pour zircone, cire, PMMA, etc.

    Caractéristique 100% compatible avec le système CAD/CAM Imes-Icore comme 140i, 250i, COREITEC one, etc avec un diamètre de tige de 3mm. Les outils polyvalents peuvent être utilisés pour fraiser la plupart des matériaux dentaires comme la zircone, la cire, le PMMA, le PEEK, le...
    US$18.00
    US$18.00
    US$22.50
  • Flat-end Roland CAD/CAM Tools Special for Milling Zirconia Implant

    Flat-end Roland CAD/CAM Tools Special for Milling Zirconia Implant

    Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. DLC Coat with flat-end special for milling zirconia implant Size Details H(mm) L1(mm) L(mm) D(mm) 0.6F 10 50 4 1F 20 50 4 1.5F 20 50 4 2F 20 50 4 Have...
    US$18.00
    US$18.00
    US$22.50
  • 2504201HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2504201HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...
    US$7.50
    US$7.50
    US$10.00
  • 2403201HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    2403201HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • 1043275HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    1043275HP-Cross Cut Standard Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Standard- For coarse abrasion on chrome - cobalt alloys, precious metall alloys, chrome - nickel alloys, model cast alloys, acrylics. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance....
    US$7.50
    US$7.50
    US$10.00