-
ARUM CAD/CAM 6mm Shank Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 53 6 2.0 20 55...- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
-
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
-
XTCERA CADCAM Tools 6mm Shank Carbide for PMMA, PEEK, Wax, Soft Metal,etc.
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 600SE, X-Mill 600, etc. The carbide tools can be used for milling most dental materials like wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 48...- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
PrograMill PM3/5 Carbide Tools for Milling Zirconia, Wax, PMMA, PEEK, Soft Metal
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 50...- US$18.00
- US$18.00
- US$24.00
- Precio unitario
- por
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5169, RDP5164, RDP5162, RDP5166
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Precio unitario
- por
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5154, ZDG5054
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$6.00
- US$6.00
- US$7.50
- Precio unitario
- por
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5954, ZDG5904
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offering fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$8.00
- US$8.00
- US$10.00
- Precio unitario
- por
-
DOF CRAFT 5X CAD/CAM Tools Special for Milling Metal like Titanium, CoCr, etc.
Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 32.5 4 1.5 10 32.5 4 2.0 12 32.5 4 Have Questions? Contact Us- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
Fresas Imes-Icore de 3 mm de diámetro del vástago especiales para mecanizado de PMMA, PEEK, para evitar que se pegue
Característica 100% compatible con el sistema CAD/CAM de Imes-Icore como 140i, 250i, COREITEC one, etc. con vástago de 3 mm de diámetro. Las fresas son especiales para fresar materiales resinosos como PMMA, PEEK con buen rendimiento para evitar que se pegue. Tamaño H(mm) L1(mm)...- US$22.00
- US$22.00
- US$27.50
- Precio unitario
- por
-
Flat-end Roland CAD/CAM Tools Special for Milling Zirconia Implant
Característica 100% compatible con el sistema CAD / CAM de Roland como DWX50, DWX51D, DWX52, etc. Revestimiento DLC con extremo plano especial para fresado de implantes de circonio. Tamaño H(mm) L1(mm) L(mm) D(mm) 1.0 16 50 4 2.0 20 50 4 ¿Tiene preguntas? CONTÁCTENOS- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
-
PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Carbide single flute is a design special for plastic materials to lower the cutting resistant and smoother surface finishing. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 50 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
-
VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal
Feature 100% compatible with the VHF 4axis CAD/CAM system like K4, N4, etc with 35mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
-
VHF 4-axis CADCAM Carbide Single-Flute/Double-Flute Milling Tools for PMMA, PEEK
Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 35 3 2.0 16...- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
VHF CAD/CAM Milling Bur 40mm Length with DLC Coat for Zirconia Block
Feature 100% compatible with VHF CAD/CAM system like R5, K5, S1, S2, S5, etc with 40mm total length. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 40 3 0.6 7...- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
-
Fresa CAD/CAM VHF N4 (32mm longitud) para titanio, CoCr
Característica 100% compatible con el sistema CAD/CAM VHF N4. Las herramientas son especiales para fresar materiales metálicos como titanio, CoCr Disc. Tamaño H(mm) L1(mm) L(mm) D(mm) 1.0 10 32 3 2.0 12 32 3 ¿Tiene preguntas?CONTÁCTENOS- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR
Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are designed with bullnose header types. Size Details H(mm) L1(mm) L(mm) D(mm) D1.5R0.1 5 50 6 D1.5R0.2 14 50 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Precio unitario
- por
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP1000, RDP1009, RDP1004, RDP1002, RDP1006
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$10.00
- US$10.00
- US$12.50
- Precio unitario
- por
-
Dental Ceramic Diamond Grinder No Water Cooling Needed for Triming Zirconia, Glass Ceramic, Porcelain-ZDG5049, ZDG5044, ZDG5199, ZDG5029, ZDG5179
Usage For shaping and fine grinding of various ceramic restorations, including zirconia, porcelain, and glass ceramics. Green products are medium-coarse grit, offeriYHng fast shaping speed, typically used for rough grinding of ceramic restorations after sintering, providing quick contouring. Light yellow products are fine-grit, ideal...- US$5.00
- US$5.00
- US$6.25
- Precio unitario
- por
-
DOF CRAFT 5X CAD/CAM Carbide Tools for Milling Zirconia, Wax, PMMA, PEEK, Soft Metal, etc.
Feature 100% compatible with the DOF CRAFT 5X CAD/CAM system. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16...- US$18.00
- US$18.00
- US$25.00
- Precio unitario
- por
-
ARUM CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR
Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 14 50 6 2.0 18 55 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Precio unitario
- por
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Fresas multiusos Amann Girrbach para fresado de zirconio, cera, PMMA, etc.
Característica 100% compatible con el sistema CAD / CAM de Imes-Icore como Motion 2, Mikro, etc. Las fresas multiusos se pueden utilizar para fresar la mayoría de materiales dentales como zirconia, cera, PMMA, PEEK, metal blando, etc. con buen rendimiento. Tamaño H(mm) L1(mm) L(mm)...
- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
Fresas CAD/CAM Amann Girrbach para cerámica de vidrio, disilicato de litio
Característica 100% compatible con el sistema CAD / CAM de Amann Girrbach como Motion 2, Mikro ic, Matick, etc. Las fresas se producen con grano de diamante para el mecanizado de cerámica de vidrio, disilicato de litio, cerámica híbrida, etc. Detalles del tamaño H(mm)...
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Fresas Amann Girrbach con recubrimiento de diamante especial para fresar zirconia
Característica 100% compatible con el sistema CAD/CAM de Amann Girrbach como Motion2, Mikro, etc. Recubrimiento de diamante es especial para fresar discos de Zirconia con buen rendimiento para fresar coronas de alrededor de 500 unidades. Tamaño H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3...
- US$24.00
- US$24.00
- US$30.00
- Precio unitario
- por
Fresas Amann Girrbach especiales para mecanizado de PMMA, PEEK, para evitar que se pegue
Característica 100% compatible con el sistema CAD/CAM de Amann Girrbach como Motion2, Mikro etc. Las fresas son especiales para fresar materiales resinosos como PMMA, PEEK con buen rendimiento para evitar que se pegue. Tamaño H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16...
- US$22.00
- US$22.00
- US$27.50
- Precio unitario
- por
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Característica
100% compatible con el sistema CAD/CAM de Amann Girrbach como Motion2, Mikro .etc.
Revestimiento DLC con extremo plano especial para fresado de implantes de zirconia.
Tamaño
H(mm)
L1(mm)
L(mm)
D(mm)
0.6
16
47
3
1.2
20
47
3
¿Tiene preguntas? CONTÁCTENOS
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
- Elegir una selección da como resultado una actualización de página completa.