-
YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite
Feature 100% compatible with the YUCERA YRC-6X CAD/CAM system with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 10 50 4 2.5 16...- US$20.00
- US$20.00
- Precio unitario
- por
-
Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block
Feature 100% compatible with the Dentium Rainbow-mill CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 43 3 1.0 16 50 3 2.0 16 50 3...- US$24.00
- US$24.00
- US$30.00
- Precio unitario
- por
-
XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc
Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools with AlTiN coat is special to mill metal disc like titanium, Cobalt Chrome,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 3.0 15...- US$24.00
- US$24.00
- US$30.00
- Precio unitario
- por
-
Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...- US$24.00
- US$24.00
- US$30.00
- Precio unitario
- por
-
Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque
Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
- A1O
- A2O
- A3O
- A3.5O
-
Fresas Wieland Zenotec Select para cerámica de vidrio, disilicato de litio
Característica 100% compatible con el sistema CAD/CAM de Wieland Zenotec Select. Las fresas se producen con grano de diamante para el mecanizado de cerámica de vidrio, disilicato de litio, cerámica híbrida, etc. Detalles del tamaño H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0...- US$20.00
- US$20.00
- US$31.25
- Precio unitario
- por
-
Fresas ZirkonZahn con herramientas de vástago de 3mm y recubrimiento de diamante especial para fresar zirconia
Característica 100% compatible con el sistema CAD/CAM de ZirkonZahn como M5, etc. con vástago de 3mm de diámetro. Recubrimiento de diamante es especial para fresar discos de Zirconia con buen rendimiento para fresar coronas de alrededor de 500 unidades. Detalles del tamaño H(mm) L1(mm)...- US$24.00
- US$24.00
- US$30.00
- Precio unitario
- por
-
ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 4 57 3 1.5 16 57 3 Have Questions? Contact Us- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
Fresas ZirkonZahn de 3mm de diámetro del vástago especiales para mecanizado de PMMA, PEEK, para evitar que se pegue
Característica 100% compatible con el sistema CAD/CAM de ZirkonZahn como M5, etc. con vástago de 3 mm de diámetro. Las fresas son especiales para fresar materiales resinosos como PMMA, PEEK con buen rendimiento para evitar que se pegue. Tamaño H(mm) L1(mm) L(mm) D(mm) 0.5...- US$20.00
- US$20.00
- US$27.50
- Precio unitario
- por
-
Fresas multiusos Sirona MCX5 para fresado de zirconio, cera, PMMA, etc.
Característica 100% compatible con el sistema Sirona MCX5 CAD/CAM. Las fresas multiusos se pueden utilizar para fresar la mayoría de materiales dentales como zirconia, cera, PMMA, PEEK, metal blando, etc. con buen rendimiento. Tamaño H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18...- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
-
ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.
Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are one flute design special for milling PMMA, Wax, PEEK. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14...- De US$16.00
- De US$16.00
- US$20.00
- Precio unitario
- por
-
Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...- US$20.00
- US$20.00
- US$30.00
- Precio unitario
- por
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5159, RDP5154, RDP5152, RDP5156
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Precio unitario
- por
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5979A, RDP5974A, RDP5977A, RDP5977B
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$10.00
- US$10.00
- US$12.50
- Precio unitario
- por
-
4106201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$10.00
- US$10.00
- US$10.00
- Precio unitario
- por
-
5006257HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$10.00
- US$10.00
- US$10.00
- Precio unitario
- por
-
5005239HP-Cross Cut Coarse Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Cross Cut Standard- For efficient reduction of resins incl. tray materials as well as plaster. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$10.00
- US$10.00
- US$10.00
- Precio unitario
- por
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Fresas multiusos Amann Girrbach para fresado de zirconio, cera, PMMA, etc.
Característica 100% compatible con el sistema CAD / CAM de Imes-Icore como Motion 2, Mikro, etc. Las fresas multiusos se pueden utilizar para fresar la mayoría de materiales dentales como zirconia, cera, PMMA, PEEK, metal blando, etc. con buen rendimiento. Tamaño H(mm) L1(mm) L(mm)...
- US$20.00
- US$20.00
- US$25.00
- Precio unitario
- por
Fresas CAD/CAM Amann Girrbach para cerámica de vidrio, disilicato de litio
Característica 100% compatible con el sistema CAD / CAM de Amann Girrbach como Motion 2, Mikro ic, Matick, etc. Las fresas se producen con grano de diamante para el mecanizado de cerámica de vidrio, disilicato de litio, cerámica híbrida, etc. Detalles del tamaño H(mm)...
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Fresas Amann Girrbach con recubrimiento de diamante especial para fresar zirconia
Característica 100% compatible con el sistema CAD/CAM de Amann Girrbach como Motion2, Mikro, etc. Recubrimiento de diamante es especial para fresar discos de Zirconia con buen rendimiento para fresar coronas de alrededor de 500 unidades. Tamaño H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3...
- US$24.00
- US$24.00
- US$30.00
- Precio unitario
- por
Fresas Amann Girrbach especiales para mecanizado de PMMA, PEEK, para evitar que se pegue
Característica 100% compatible con el sistema CAD/CAM de Amann Girrbach como Motion2, Mikro etc. Las fresas son especiales para fresar materiales resinosos como PMMA, PEEK con buen rendimiento para evitar que se pegue. Tamaño H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16...
- US$22.00
- US$22.00
- US$27.50
- Precio unitario
- por
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Característica
100% compatible con el sistema CAD/CAM de Amann Girrbach como Motion2, Mikro .etc.
Revestimiento DLC con extremo plano especial para fresado de implantes de zirconia.
Tamaño
H(mm)
L1(mm)
L(mm)
D(mm)
0.6
16
47
3
1.2
20
47
3
¿Tiene preguntas? CONTÁCTENOS
- US$18.00
- US$18.00
- US$22.50
- Precio unitario
- por
- Elegir una selección da como resultado una actualización de página completa.