-
PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Carbide single flute is a design special for plastic materials to lower the cutting resistant and smoother surface finishing. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 50 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
-
DEPRAG CADCAM Tools 6mm Shank with AlTiN Coat for Milling Titanium, CoCr
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) T1-3.0-Roto 12.5 50 6 T2-2.0-Roto 12.5 50 6 T3-1.5-Roto 8 50 6...- US$22.00
- US$22.00
- US$31.25
- Stückpreis
- pro
-
DEPRAG Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid composite, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 10 50 6...- US$22.00
- US$22.00
- US$31.25
- Stückpreis
- pro
-
DEPRAG CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 6 50 4 0.6 15...- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
-
ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.
Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are one flute design special for milling PMMA, Wax, PEEK. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14...- Aus US$16.00
- Aus US$16.00
- US$20.00
- Stückpreis
- pro
-
ZirkonZahn 6mm Shank CADCAM Tools Single Flute for Milling PMMA, PEEK
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 14 50 6 2.0 18...- US$25.00
- US$25.00
- US$31.25
- Stückpreis
- pro
-
Dental Four DF400/DF600 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 50 6 2.5 20...- US$25.00
- US$25.00
- US$31.25
- Stückpreis
- pro
-
Dental Four DF400/DF600 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 16 50 6 2.5...- US$22.00
- US$22.00
- US$27.50
- Stückpreis
- pro
-
Aidite Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Aidite AMW-400, AMW-400S, AMM580, AMM520 Pro, etc with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 50 6 1.0 10...- US$25.00
- US$25.00
- US$31.25
- Stückpreis
- pro
-
Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...- US$20.00
- US$20.00
- US$30.00
- Stückpreis
- pro
-
Aidite 4mm Shank AMD-500 CADCAM Tools Single Flute for Milling PMMA, PEEK
Feature 100% compatible with Aidite CAD/CAM system like AMD-500, AMD-500S, AMD-500DC, etc with 4mm Shank. The single flute tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 16 50 4 2.0...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
Dental Four DF400/DF600 6mm Shank Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Have Questions? Contact Us- US$25.00
- US$25.00
- US$31.25
- Stückpreis
- pro
-
Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
-
Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
Roland CAD/CAM Carbide Tools Flat-End for Milling Zirconia, PMMA, PEEK, etc.
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6(Flat-End) 10 50...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
Dental Four DF400/DF600 6mm Shank Tools 55mm Special for Milling Titanium, Cocr
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling metal materials like titanium, CoCr disc. Have Questions? Contact Us- Aus US$25.00
- Aus US$25.00
- US$31.25
- Stückpreis
- pro
-
UP3D P52 P53 CADCAM Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4 0.6 8 50 4 1.0...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
Imes-Icore 6mm Shank Single Flute Carbide Tools for Milling PMMA, PEEK T11/T13, T12/T14
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. The single flute tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 14 53 6 2.0 20 53 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Stückpreis
- pro
-
ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR
Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are designed with bullnose header types. Size Details H(mm) L1(mm) L(mm) D(mm) D1.5R0.1 5 50 6 D1.5R0.2 14 50 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Stückpreis
- pro
-
ARUM CAD/CAM 6mm Shank Tools with German Craftsmanship Diamond Coat for Milling Zirconia Disc
Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. Diamond Coat is special for milling zirconia disc with good performance Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 55 6 2.0 20 55 6 Have Questions? Contact Us- US$30.00
- US$30.00
- US$50.00
- Stückpreis
- pro
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach Mehrzweckwerkzeuge zum Fräsen von Zirkonoxid, Wachs, PMMA etc.
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM-System wie Motion2, Mikro, etc.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,3164730,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
Amann Girrbach CAD/CAM Fräser für Lithiumdisilikat, Glaskeramik
Besonderheit 100% kompatibel mit dem Amann Girrbach CAD/CAM wie Motion 2, Mikro ic, Matick, etc. Die Fräser werden mit Diamantkorn für die Bearbeitung von Glaskeramik, Lithiumdisilikat, Hybridkeramik etc. Größenangaben H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43 3 1.4 13.65 43...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM Werkzeuge mit Diamond Coat Special zum Fräsen von Zirkonia Disc
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion 2, Mikro, etc.Diamond Coat ist speziell zum Fräsen von Zirkonoxidscheiben mit guter Leistung zum Fräsen von etwa 500 Einheiten Kronen geeignet.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM-Fräser Spezial für PMMA, PEEK, um Ankleben zu vermeiden
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion2, Mikro, etc.Die Werkzeuge sind speziell zum Fräsen von Harzmaterialien wie PMMA, PEEK mit guter Leistung, um ein Anhaften zu vermeiden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$22.00
- US$22.00
- US$27.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM-Werkzeuge mit flachem Ende speziell zum Fräsen von Zirkonoxidimplantaten
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion2, Mikro .etc.DLC Coat mit flachem Ende speziell zum Fräsen von Zirkonoxidimplantaten. 0,6 mm hat 2 Klingen und 1,2 mm hat 4 Klingen.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6164731,220473Habe Fragen?Kontaktiere uns
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
- Die Auswahl einer Auswahl führt zu einer vollständigen Seitenaktualisierung.