-
WielandMINI Mehrzweckwerkzeuge zum Fräsen von Zirkonoxid, Wachs, PMMA usw.
Besonderheit100% kompatibel mit demWielandMINI CAD/CAM-System.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,3163530,773531.0163532.520353Habe Fragen?Kontaktiere uns- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
SironaMCX5 Mehrzweckwerkzeuge zum Fräsen von Zirkonoxid, Wachs, PMMA usw.
Besonderheit100% kompatibel mit demSironaMCX5 CAD/CAM-System.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,554231.0184332.525433Habe Fragen?Kontaktiere uns- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
ARUMCAD/CAM-Fräser 4 mm Schaft mit DLC-Beschichtung für Zirkonoxidblock
Besonderheit100% kompatibel mit demARUMCAD/CAM-System.DLC Coat kann etwa 150 Einheiten mahlen. (abhängig von der Härte des Zirkonoxidblocks).GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6104541.0165042.018504Habe Fragen?Kontaktiere uns- US$16.00
- US$16.00
- US$20.00
- Stückpreis
- pro
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5959, RDP5954, RDP5952, RDP5956
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Stückpreis
- pro
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5409, RDP5404, RDP5402, RDP5406
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Stückpreis
- pro
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5159, RDP5154, RDP5152, RDP5156
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Stückpreis
- pro
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5979A, RDP5974A, RDP5977A, RDP5977B
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$10.00
- US$10.00
- US$12.50
- Stückpreis
- pro
-
2505275HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2502198HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2411274HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2409272HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- Stückpreis
- pro
-
2408274HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2407237HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2406239HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2404201HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2402185HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
2401142HP-Spiral Cut Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Fine- Ensures an exceptionally fine cutting surface on all alloys-especially on titanium since the special cut pattern avoids clogging. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
4106201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
4103201HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
4102145HP-Diamond Cut for Slightly Rough Surface Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Diamond Cut for Slightly Rough Surface- fine, scale-like cutting pattern, for aesthetically most demanding veneers. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety of Shapes and Sizes: Available in...- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM Werkzeuge mit Diamond Coat Special zum Fräsen von Zirkonia Disc
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion 2, Mikro, etc.Diamond Coat ist speziell zum Fräsen von Zirkonoxidscheiben mit guter Leistung zum Fräsen von etwa 500 Einheiten Kronen geeignet.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
Amann Girrbach Mehrzweckwerkzeuge zum Fräsen von Zirkonoxid, Wachs, PMMA etc.
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM-System wie Motion2, Mikro, etc.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,3164730,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
Amann Girrbach CAD/CAM-Fräser Spezial für PMMA, PEEK, um Ankleben zu vermeiden
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion2, Mikro, etc.Die Werkzeuge sind speziell zum Fräsen von Harzmaterialien wie PMMA, PEEK mit guter Leistung, um ein Anhaften zu vermeiden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$22.00
- US$22.00
- US$27.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM Fräser für Lithiumdisilikat, Glaskeramik
Besonderheit 100% kompatibel mit dem Amann Girrbach CAD/CAM wie Motion 2, Mikro ic, Matick, etc. Die Fräser werden mit Diamantkorn für die Bearbeitung von Glaskeramik, Lithiumdisilikat, Hybridkeramik etc. Größenangaben H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43 3 1.4 13.65 43...
- US$18.00
- US$18.00
- US$31.25
- Stückpreis
- pro
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM-Werkzeuge mit flachem Ende speziell zum Fräsen von Zirkonoxidimplantaten
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion2, Mikro .etc.DLC Coat mit flachem Ende speziell zum Fräsen von Zirkonoxidimplantaten. 0,6 mm hat 2 Klingen und 1,2 mm hat 4 Klingen.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6164731,220473Habe Fragen?Kontaktiere uns
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
- Die Auswahl einer Auswahl führt zu einer vollständigen Seitenaktualisierung.