-
3008201HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....- US$10.00
- US$10.00
- US$10.00
- Stückpreis
- pro
-
3004198HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....- US$10.00
- US$10.00
- US$10.00
- Stückpreis
- pro
-
3002145HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....- US$7.50
- US$7.50
- US$10.00
- Stückpreis
- pro
-
Milling Burs Compaitble with PrograMill Dry CADCAM for Zirconia Block
Feature 100% compatible with the Ivoclar PrograMill Dry (PM Dry) CAD/CAM system. Zirconia tools are available in 2.5c(748040), 1.0c(748039), 2.5(748043), 1.0(748042), 0.7(748041), 0.3(748037) Size Details H(mm) L1(mm) L(mm) D(mm) 2.5c 20 40 3 1.0c 16 40 3 2.5 20 40 3 1.0 16 40...- Aus US$18.00
- Aus US$18.00
- US$22.50
- Stückpreis
- pro
-
YUCERA YRC-5X CADCAM Milling Burs D4mm Shank with Diamond Coat Special for Zirconia block
Feature 100% compatible with the YUCERA Dry CAD/CAM system like YRC-5X, YRC-9pro with 4mm shank. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 18 50...- US$20.00
- US$20.00
- Stückpreis
- pro
-
YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite
Feature 100% compatible with the YUCERA YRC-6X CAD/CAM system with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 10 50 4 2.5 16...- US$20.00
- US$20.00
- Stückpreis
- pro
-
Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block
Feature 100% compatible with the Dentium Rainbow-mill CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 43 3 1.0 16 50 3 2.0 16 50 3...- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
-
XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
XTCERA Xmill 300 Xmill 500 Milling Cutters 4mm Shank with Diamond Coat Special for Zirconia
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill 500, X-Mill 580, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6...- US$22.00
- US$22.00
- US$30.00
- Stückpreis
- pro
-
DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc
Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools with AlTiN coat is special to mill metal disc like titanium, Cobalt Chrome,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 3.0 15...- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
-
ZirkonZahn 6mm Shank CADCAM Tools Single Flute for Milling PMMA, PEEK
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 14 50 6 2.0 18...- US$25.00
- US$25.00
- US$31.25
- Stückpreis
- pro
-
Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
-
Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque
Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
- A1O
- A2O
- A3O
- A3.5O
-
Wieland Zenotec Select Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0 19 40 3...- US$20.00
- US$20.00
- US$31.25
- Stückpreis
- pro
-
ZirkonZahn 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5 with 3mm Shank. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 6 57 3 1.0 12 57 3 2.0...- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
-
ZirkonZahn3 mm Schaftwerkzeuge mit flachem Ende zum Fräsen von Zirkonoxid-Implantat-Abutments
Besonderheit100% kompatibel mit demZirkonZahnCAD/CAM-System wie M5 usw.Flat-End ist speziell zum Fräsen von Zirkonoxid-Implantat-Abutments geeignet.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,645731,516573Habe Fragen?Kontaktiere uns- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
-
ZirkonZahnM5 Fräser 3mm Schaft Spezial für PMMA, PEEK, um Ankleben zu vermeiden
Besonderheit100% kompatibel mit demZirkonZahnCAD/CAM-System wie M5 usw.Die Werkzeuge sind speziell zum Fräsen von Harzmaterialien wie PMMA, PEEK mit guter Leistung, um ein Anhaften zu vermeiden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,555731.0125732.018573Habe Fragen?Kontaktiere uns- US$20.00
- US$20.00
- US$27.50
- Stückpreis
- pro
-
SironaMCX5 Mehrzweckwerkzeuge zum Fräsen von Zirkonoxid, Wachs, PMMA usw.
Besonderheit100% kompatibel mit demSironaMCX5 CAD/CAM-System.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,554231.0184332.525433Habe Fragen?Kontaktiere uns- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach Mehrzweckwerkzeuge zum Fräsen von Zirkonoxid, Wachs, PMMA etc.
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM-System wie Motion2, Mikro, etc.Die Mehrzweckwerkzeuge können zum Fräsen der meisten Dentalmaterialien wie Zirkonoxid, Wachs, PMMA, PEEK, Weichmetall usw. mit guter Leistung verwendet werden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,3164730,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$20.00
- US$20.00
- US$25.00
- Stückpreis
- pro
Amann Girrbach CAD/CAM Fräser für Lithiumdisilikat, Glaskeramik
Besonderheit 100% kompatibel mit dem Amann Girrbach CAD/CAM wie Motion 2, Mikro ic, Matick, etc. Die Fräser werden mit Diamantkorn für die Bearbeitung von Glaskeramik, Lithiumdisilikat, Hybridkeramik etc. Größenangaben H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43 3 1.4 13.65 43...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM Werkzeuge mit Diamond Coat Special zum Fräsen von Zirkonia Disc
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion 2, Mikro, etc.Diamond Coat ist speziell zum Fräsen von Zirkonoxidscheiben mit guter Leistung zum Fräsen von etwa 500 Einheiten Kronen geeignet.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$24.00
- US$24.00
- US$30.00
- Stückpreis
- pro
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM-Fräser Spezial für PMMA, PEEK, um Ankleben zu vermeiden
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion2, Mikro, etc.Die Werkzeuge sind speziell zum Fräsen von Harzmaterialien wie PMMA, PEEK mit guter Leistung, um ein Anhaften zu vermeiden.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6134731.0164732.516473Habe Fragen?Kontaktiere uns
- US$22.00
- US$22.00
- US$27.50
- Stückpreis
- pro
Amann Girrbach CAD/CAM-Werkzeuge mit flachem Ende speziell zum Fräsen von Zirkonoxidimplantaten
Besonderheit100% kompatibel mit dem Amann Girrbach CAD/CAM System wie Motion2, Mikro .etc.DLC Coat mit flachem Ende speziell zum Fräsen von Zirkonoxidimplantaten. 0,6 mm hat 2 Klingen und 1,2 mm hat 4 Klingen.GrößenangabenHmm)L1 (mm)L(mm)D(mm)0,6164731,220473Habe Fragen?Kontaktiere uns
- US$18.00
- US$18.00
- US$22.50
- Stückpreis
- pro
- Die Auswahl einer Auswahl führt zu einer vollständigen Seitenaktualisierung.