-
PrograMill PM3/5 Tools Carbide Single Flute Special for Milling PMMA, PEEK, Wax,etc
Feature 100% compatible with the PrograMill PM3/5 CAD/CAM system with 3mm shank diameter. Carbide single flute is a design special for plastic materials to lower the cutting resistant and smoother surface finishing. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 50 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
DEPRAG CADCAM Tools 6mm Shank with AlTiN Coat for Milling Titanium, CoCr
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) T1-3.0-Roto 12.5 50 6 T2-2.0-Roto 12.5 50 6 T3-1.5-Roto 8 50 6...- US$22.00
- US$22.00
- US$31.25
- Unit price
- per
-
DEPRAG Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite
Feature 100% compatible with the DEPRAG CADCAM system like W52,etc. with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid composite, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 10 50 6...- US$22.00
- US$22.00
- US$31.25
- Unit price
- per
-
DEPRAG CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 6 50 4 0.6 15...- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
-
ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.
Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are one flute design special for milling PMMA, Wax, PEEK. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14...- From US$16.00
- From US$16.00
- US$20.00
- Unit price
- per
-
ZirkonZahn 6mm Shank CADCAM Tools Single Flute for Milling PMMA, PEEK
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 14 50 6 2.0 18...- US$25.00
- US$25.00
- US$31.25
- Unit price
- per
-
Dental Four DF400/DF600 6mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 6 1.0 16 50 6 2.5 20...- US$25.00
- US$25.00
- US$31.25
- Unit price
- per
-
Dental Four DF400/DF600 6mm Shank Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 16 50 6 2.5...- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
-
Aidite Diamond Grinder Tools 6mm Shank for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Aidite AMW-400, AMW-400S, AMM580, AMM520 Pro, etc with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 50 6 1.0 10...- US$25.00
- US$25.00
- US$31.25
- Unit price
- per
-
Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...- US$20.00
- US$20.00
- US$30.00
- Unit price
- per
-
Aidite 4mm Shank AMD-500 CADCAM Tools Single Flute for Milling PMMA, PEEK
Feature 100% compatible with Aidite CAD/CAM system like AMD-500, AMD-500S, AMD-500DC, etc with 4mm Shank. The single flute tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 16 50 4 2.0...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Dental Four DF400/DF600 6mm Shank Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Have Questions? Contact Us- US$25.00
- US$25.00
- US$31.25
- Unit price
- per
-
Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
-
Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Roland CAD/CAM Carbide Tools Flat-End for Milling Zirconia, PMMA, PEEK, etc.
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6(Flat-End) 10 50...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Dental Four DF400/DF600 6mm Shank Tools 55mm Special for Milling Titanium, Cocr
Feature 100% compatible with Dental Four CAD/CAM system like DF400, DF600, etc. The tools are special for milling metal materials like titanium, CoCr disc. Have Questions? Contact Us- From US$25.00
- From US$25.00
- US$31.25
- Unit price
- per
-
UP3D P52 P53 CADCAM Tools Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the UP3D CAD/CAM system like P52, P53, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 4 50 4 0.6 8 50 4 1.0...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Imes-Icore 6mm Shank Single Flute Carbide Tools for Milling PMMA, PEEK T11/T13, T12/T14
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. The single flute tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 14 53 6 2.0 20 53 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
-
ARUM CAD/CAM 6mm Shank Tools Bullnose for Milling Titanium,COCR
Feature 100% compatible with the ARUM CAD/CAM system like 5X-200, 5X-450, 5X-500, etc with 6mm shank diameter. The tools are designed with bullnose header types. Size Details H(mm) L1(mm) L(mm) D(mm) D1.5R0.1 5 50 6 D1.5R0.2 14 50 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
-
ARUM CAD/CAM 6mm Shank Tools with German Craftsmanship Diamond Coat for Milling Zirconia Disc
Feature 100% compatible with the Arum CAD/CAM system like 5X-200, 5X-450, 5X-500, etc. Diamond Coat is special for milling zirconia disc with good performance Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 55 6 2.0 20 55 6 Have Questions? Contact Us- US$30.00
- US$30.00
- US$50.00
- Unit price
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
Amann Girrbach CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 7 43 3 1.0 14...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
- Choosing a selection results in a full page refresh.