-
YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite
Feature 100% compatible with the YUCERA YRC-6X CAD/CAM system with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 10 50 4 2.5 16...- US$20.00
- US$20.00
- Unit price
- per
-
Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block
Feature 100% compatible with the Dentium Rainbow-mill CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 43 3 1.0 16 50 3 2.0 16 50 3...- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
-
XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.
Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking
Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc
Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools with AlTiN coat is special to mill metal disc like titanium, Cobalt Chrome,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 3.0 15...- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
-
ARUM 5X-400/5X-300 4mm Shank Tools Carbide for Milling PMMA, PEEK, etc.
Feature 100% compatible with the ARUM CAD/CAM system like 5X-400, 5X-300, etc with 4mm shank diameter. The tools are one flute design special for milling PMMA, Wax, PEEK. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 44 4 1.5 14...- From US$16.00
- From US$16.00
- US$20.00
- Unit price
- per
-
Aidite AMD-500/AMM-520 CADCAM Tools with Diamond Coat Special for Milling Zirconia
Feature 100% compatible with the Aidite CAD/CAM system like AMD-500, AMM-520, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 3 50 4 0.6 6...- US$20.00
- US$20.00
- US$30.00
- Unit price
- per
-
Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
-
Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Imes-Icore CAD/CAM Tools 3mm Shank for Milling Titanium, CoCr T1/T6 T2/T7 T4/T9
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 9 47 3 2.0 12 47 3 3.0...- US$25.00
- US$25.00
- US$31.25
- Unit price
- per
-
Wieland Zenotec Select Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Wieland Zenotec Select CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0 19 40 3...- US$20.00
- US$20.00
- US$31.25
- Unit price
- per
-
ZirkonZahn 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5 with 3mm Shank. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 6 57 3 1.0 12 57 3 2.0...- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
-
ZirkonZahn 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 4 57 3 1.5 16 57 3 Have Questions? Contact Us- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
ZirkonZahn 3mm Shank Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M5, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 57 3 1.0 12 57 3 2.0 18...- US$20.00
- US$20.00
- US$27.50
- Unit price
- per
-
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
-
Sirona MCX5 Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Sirona MCX5 CAD/CAM system. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 42 3 1.0 18 43...- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
-
Arum CAD/CAM Milling Bur 4mm Shank with DLC Coat for Zirconia Block
Feature 100% compatible with the ARUM CAD/CAM system. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 16 50 4 2.0 18 50 4 Have Questions?Contact Us- US$16.00
- US$16.00
- US$20.00
- Unit price
- per
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5159, RDP5154, RDP5152, RDP5156
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$7.00
- US$7.00
- US$8.75
- Unit price
- per
-
Dental Rubber Diamond Polisher for High-gloss Polishing Zirconia Porcelain-RDP5979A, RDP5974A, RDP5977A, RDP5977B
Usage Red and blue products are coarse and medium-coarse grits, used for polishing zirconia and various cast ceramic restorations after grinding and shaping, before glazing. Gray products are fine grit, used for pre-polishing zirconia and various ceramic restorations after grinding and shaping, without glazing....- US$10.00
- US$10.00
- US$12.50
- Unit price
- per
-
2505275HP-Spiral Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank
Sprial Cut Super Fine- Excellent cutting performance and facilitated chip removal on tough materials like titanium and NP alloys, P matals, plaster of Paris, model castings, veneer resins, prosthetic resins. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision...- US$10.00
- US$10.00
- US$10.00
- Unit price
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Unit price
- per
Amann Girrbach CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$24.00
- US$24.00
- US$30.00
- Unit price
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Unit price
- per
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.
Feature
100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc.
The tools are special for milling metal material like titanium, Co-Cr,etc.
Size Details
H(mm)
L1(mm)
L(mm)
D(mm)
1.0
8
43
3
2.0
12
43
3
Have Questions? Contact Us
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Unit price
- per
- Choosing a selection results in a full page refresh.